How to install the hood cable assembly and related components on 2008 Toyota Camry?

You must position the hood cable assembly inside the engine compartment where it passes through the upper radiator support before linking the clamps according to the shown illustration. Afterward you should install the hood lock control lever before connecting its control cable. The hood lock assembly without engine hood courtesy switch requires application of MP grease on its moving parts followed by cable connection then securing it with 3 bolts torqued to 7.5 Nm (77 kgf-cm, 66 in-lbf). The assembly with engine hood courtesy switch follows previous installation instructions while you also need to connect the connector in addition. High pitched horn assembly installation should be performed first followed by the front fender liner installation using grommet and 4 screws and a bolt with 5 clips. Check and regulate the hood sub-assembly whenever necessary. The front bumper assembly installation should include the fog lights options as needed while also utilizing the 2GR-FE cool air intake duct seal. Begin by attaching the front wheel opening extension pad to its place using three screws and then install the front wheel. The technician must adjust fog lights to the correct angle using appropriate equipment while performing the required aiming inspection.

OEM 2008 Toyota Camry Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Hood Cables found

View related parts
2008 Toyota Camry Cable Handle, Gray, Front
Part Number: 53611-AA010-B1
$14.99 MSRP: $20.86
You Save: $5.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Replaces: 53611-12040-B5
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.4 x 11.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Release Handle, Brown, Front
Part Number: 53611-AA010-E1
$15.01 MSRP: $20.89
You Save: $5.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GREGE,TRIM4#
- Position: Front
- Replaces: 53611-12040-E2
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.8 x 10.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-E1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Release Handle, Gray, Front
Part Number: 53611-AA010-B5
$15.01 MSRP: $20.89
You Save: $5.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Part Name Code: 53601
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.3 x 11.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53611-AA010-B5
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Release Cable, Front
Part Number: 53630-06100
$40.10 MSRP: $55.83
You Save: $15.73 (29%)
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Replaces: 53630-33140
- Part Name Code: 53630
- Item Weight: 0.70 Pounds
- Item Dimensions: 21.5 x 12.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53630-06100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Camry Hood Cable

Looking for affordable OEM 2008 Toyota Camry Hood Cable? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Parts Questions & Experts Answers

Q: How to install the hood cable assembly and related components on 2008 Toyota Camry?
A: You must position the hood cable assembly inside the engine compartment where it passes through the upper radiator support before linking the clamps according to the shown illustration. Afterward you should install the hood lock control lever before connecting its control cable. The hood lock assembly without engine hood courtesy switch requires application of MP grease on its moving parts followed by cable connection then securing it with 3 bolts torqued to 7.5 Nm (77 kgf-cm, 66 in-lbf). The assembly with engine hood courtesy switch follows previous installation instructions while you also need to connect the connector in addition. High pitched horn assembly installation should be performed first followed by the front fender liner installation using grommet and 4 screws and a bolt with 5 clips. Check and regulate the hood sub-assembly whenever necessary. The front bumper assembly installation should include the fog lights options as needed while also utilizing the 2GR-FE cool air intake duct seal. Begin by attaching the front wheel opening extension pad to its place using three screws and then install the front wheel. The technician must adjust fog lights to the correct angle using appropriate equipment while performing the required aiming inspection.