How to install the hood cable assembly and related components on Toyota Camry?

Installing the hood cable assembly requires passing it through the engine compartment to the upper radiator support and attaching the clamps. Add the hood cable lever and complete attachment of the hood cable. Installation of the hood lock assembly sans engine hood courtesy switch requires MP grease application on the sliding areas of the lock coupled with attachment of the hood cable followed by usage of 3 bolts with 7.5 Nm (77 kgf-cm, 66 in-lbf) torque. Proceed with the assembly steps as before while also establishing the connector for the engine hood courtesy switch model. After installing the high pitched horn assembly workers should install the front fender liner through the grommet with 4 screws and complete the installation with a bolt and five clips. First inspect and adjust the hood sub-assembly before putting on the front bumper assembly alongside possible fog lights and both the seal for the cool air intake duct 2GR-FE. Secure the 3 screws into the front wheel opening extension pad after which you can install the front wheel. Before adjusting foglights the technician should prepare the automobile for inspection following the adjustment procedure. Any required adjustments must be performed.

OEM Toyota Camry Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Hood Cables found

View related parts
Toyota Camry Release Cable, Front
Part Number: 53630-06030
$39.90 MSRP: $55.53
You Save: $15.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2003 Toyota Camry | CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Lever Sub-Assembly, Hood Lock Control, Front
Part Number: 53601-02020-C0
$56.15 MSRP: $78.16
You Save: $22.01 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Lever, Beige, Front
Part Number: 53601-52010-L1
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018 Toyota Camry | L, LE, SE, XLE, XSE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Handle, Beige, Front
Part Number: 53601-02020-L0
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: NEUTRAL BEIGE,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2019 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Lever, Gray, Front
Part Number: 53601-02020-B4
$52.81 MSRP: $73.51
You Save: $20.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: LT.GRAY,TRIM1#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Release Cable
Part Number: 53630-03010
$23.58 MSRP: $32.81
You Save: $9.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable; Cable Assembly, Hood Lock Control
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1991 Toyota Camry | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Toyota Camry Release Handle, Gray, Front
Part Number: 53601-52010-P2
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018 Toyota Camry | L, LE, SE, XLE, XSE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Handle, Beige, Front
Part Number: 53601-02040-E2
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: NEUTRAL BEIGE,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Handle, Brown, Front
Part Number: 53611-AA010-E1
$15.05 MSRP: $20.94
You Save: $5.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GREGE,TRIM4#
- Position: Front
- Replaces: 53611-12040-E2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Handle, Front
Part Number: 53601-02020-A1
$47.31 MSRP: $65.85
You Save: $18.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: IVORY,TRIM0#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Lever, Gray, Front
Part Number: 53601-02040-B1
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Lever, Black, Front
Part Number: 53601-02040-C0
$46.35 MSRP: $64.52
You Save: $18.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Release Cable
Part Number: 53630-32060
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable; Cable Assembly, Hood Lock Control
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1991 Toyota Camry | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Toyota Camry Release Cable
Part Number: 53630-32030
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable; Cable Assembly, Hood Lock Control
- Replaces: 53630-32040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1986 Toyota Camry | DLX, LE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Toyota Camry Release Cable
Part Number: 53630-33010
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable; Cable Assembly, Hood Lock Control
- Replaces: 53630-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Release Cable, Front
Part Number: 53630-AA020
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Replaces: 53630-33110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Handle
Part Number: 53601-33010-C0
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Lever Sub-Assembly, Hood Lock Control
- Replaces: 53601-33010-K0, 53601-33010-E0, 53601-33010-B0, 53601-33010-J0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Release Handle, Black, Front
Part Number: 53601-33020-C0
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Handle
Part Number: 53601-32010-B0
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Lever Sub-Assembly, Hood Lock Control; Lever Assembly, Hood Lock Release
- Manufacturer Note: MEDIUM GRAY,TRIM1#
- Replaces: 53601-32010-02, 53601-32010-05, 53601-32010-E0, 53601-32010-J0, 53601-32010-04, 53601-32010-03, 53601-32010-D0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1991 Toyota Camry | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Toyota Camry Cable Handle, Front
Part Number: 53601-AA010-C0
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

Toyota Camry Hood Cable

Choose genuine Hood Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Hood Cable for your Toyota Camry? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Camry Hood Cable Parts and Q&A

Release Cable, Front
53630-06100
Q: How to install the hood cable assembly and related components on Toyota Camry?
A:
Installing the hood cable assembly requires passing it through the engine compartment to the upper radiator support and attaching the clamps. Add the hood cable lever and complete attachment of the hood cable. Installation of the hood lock assembly sans engine hood courtesy switch requires MP grease application on the sliding areas of the lock coupled with attachment of the hood cable followed by usage of 3 bolts with 7.5 Nm (77 kgf-cm, 66 in-lbf) torque. Proceed with the assembly steps as before while also establishing the connector for the engine hood courtesy switch model. After installing the high pitched Horn assembly workers should install the front fender liner through the grommet with 4 screws and complete the installation with a bolt and five clips. First inspect and adjust the hood sub-assembly before putting on the front bumper assembly alongside possible fog lights and both the seal for the cool air intake duct 2GR-FE. Secure the 3 screws into the front wheel opening extension pad after which you can install the front wheel. Before adjusting foglights the technician should prepare the automobile for inspection following the adjustment procedure. Any required adjustments must be performed.