Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Suspension Control Arm; Control Arm
Position: Passenger Side
Replaces: 48610-60050
Part Name Code: 48610
Item Weight: 5.70 Pounds
Item Dimensions: 18.3 x 6.8 x 14.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48610-60070
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota 4Runner Submodels:
40th Anniversary Edition, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Suspension Control Arm; Control Arm
Position: Lower Driver Side
Part Name Code: 48069
Item Weight: 42.40 Pounds
Item Dimensions: 21.0 x 16.6 x 18.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48069-60010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
Position: Passenger Side
Part Name Code: 48068
Item Weight: 43.20 Pounds
Item Dimensions: 19.2 x 3.5 x 18.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48068-60010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2009 Toyota 4Runner Control Arm
Looking for affordable OEM 2009 Toyota 4Runner Control Arm? Explore our comprehensive catalogue of genuine 2009 Toyota 4Runner Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota 4Runner Parts Questions & Experts Answers
Q: How to install the lower control arm assembly LH on 2009 Toyota 4Runner?
A: The installation of the lower control arm assembly LH begins with securing the bolt alongside nut and washer but only to a temporary tightness. You should put the rear axle housing in place then fasten the bolt and washer while the nut remains loose. Use a bolt to connect Parking Brake Cable Assembly Number 3 but apply torque to 13 Nm along with 127 kgf-cm or 9 ft-lbf. Taking a torque wrench set to the value of 112 Nm (1,137 kgf-cm, 83 ft-lbf) you must install the rear wheel. Stabilize the suspension when required but fully tighten the two bolts at the lower control arm assembly LH to a torque of 130 Nm (1,326 kgf-cm, 96 ft-lbf) by turning and removing the lower bolt before fixing the nut.