Other Name: Absorber Assembly, Shock; Rear Right Shock Absorber; Suspension Kit; Strut Assembly; Shock Set; Strut Kit; Shock; Absorber Assembly, Shock, Rear Passenger Side
Position: Rear Passenger Side
Part Name Code: 48530
Item Weight: 7.10 Pounds
Item Dimensions: 26.1 x 6.8 x 5.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48530-80090
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota 4Runner Submodels:
Limited, Sport, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2009 Toyota 4Runner Shock Absorber
Looking for affordable OEM 2009 Toyota 4Runner Shock Absorber? Explore our comprehensive catalogue of genuine 2009 Toyota 4Runner Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota 4Runner Parts Questions & Experts Answers
Q: How to install the rear shock absorber assembly LH on 2009 Toyota 4Runner?
A: The installation of the rear shock absorber assembly LH requires users to first attach the lower bracket before securing the cushion retainer and cushion No. 1 using a nut tightened up to 25 Nm (255 kgf-cm, 18 ft-lbf). Rephrase the front hose installation while fitting the bracket protrusion through the frame hole. Secure the shock absorber assembly rear LH by attaching a bolt which needs to be tightened to 29 Nm (296 kgf-cm, 21 ft-lbf) for appropriate installation. Securing the bracket using a wrench while installing the joint requires tension until it reaches a 1-mm (0.04 in.) gap spacing with an application torque of 25 Nm (255 kgf-cm, 18 ft-lbf). Start by installing the rear stabilizer link assembly and then set the rear wheel into position while tightening it to 112 Nm (1,137 kgf-cm, 83 ft-lbf). Lower the vehicle down and perform repeated suspension bouncing to achieve stability before finishing the process. Tighten the bolt of the shock absorber assembly rear LH to 98 Nm (1,000 kgf-cm, 72 ft-lbf) then inspect for fluid leakages.