Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
Position: Passenger Side
Part Name Code: 47313A
Item Weight: 0.90 Pounds
Item Dimensions: 7.4 x 6.1 x 1.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 90947-02E07
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2009 Scion xD Brake Line
Looking for affordable OEM 2009 Scion xD Brake Line? Explore our comprehensive catalogue of genuine 2009 Scion xD Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Scion xD Brake Line Parts Q&A
Q: How to install the rear Brake Line and ensure proper torque specifications on 2009 Scion xD?
A: Before installing the rear brake flexible hose users must place two new clips onto the axle beam. By using a union nut wrench you should tighten the 2 brake tubes onto the flexible hose with 15 Nm (155 kgf-cm, 11 ft-lbf), but the torque value with a union nut wrench should be 14 Nm (144 kgf-cm, 10 ft-lbf). The required torque value can be reached with a torque wrench measuring 300 mm (11.8 in.) in length where a separated by a 22 mm (0.866 in.) union nut wrench should maintain a parallel position to the torque wrench. Brake fluid should be added to the reservoir before performing master cylinder bleeding and sequential bleeding from brake line to brake actuator (including VSC features). Ensure to inspect the reservoir fluid level after installation while conducting a brake fluid leak inspection. To install the rear wheel apply final torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).