How to remove the rear Brake Line on Scion xD?

Start the process of removing the rear brake flexible hose by first removing the rear wheel followed by draining brake fluid while immediately cleaning painted areas that get in contact with fluid. When replacing the brake tubes use mountain-inclined and hand wrenches to divide the connections by gripping the flexible hose without endangering the brake tubes. This process should safeguard the tube end from interference from foreign substances. End the process by taking out both clips alongside the flexible hose from the axle beam.

How to install the front Brake Line on Scion xD?

Begin the installation of the front brake flexible hose through the union bolt and new gasket process while tightening it to 30 Nm (310 kgf-cm, 22 ft-lbf). Fasten the flexible hose by tightening it into position within the lock hole of the disc brake cylinder. The installation of these components starts with using a 29 Nm (300 kgf-cm, 22 ft-lbf) torque to fasten the bolt yet avoid twisting either component. You must use secure techniques for installing the flex hose tubing with its new clip followed by connecting the brake tube to the flexible hose using either a union nut wrench while holding the hose with a wrench or by strictly applying either 15 Nm (155 kgf-cm, 11 ft-lbf) torque or 14 Nm (144 kgf-cm, 10 ft-lbf) torque depending on whether you are using the union nut wrench or not. The designated torque setting of 29 Nm can be handled by a torque wrench measuring 300 mm (11.8 in.) which functions alongside a 22 mm (0.866 in.) union nut wrench that remains perpendicular to the torque tool. Post-installation requires brake fluid addition followed by a master cylinder bleeding sequence that includes a brake line bleeding operation and brake actuator bleeding service and a reservoir fluid level check as well as brake fluid leak detection. To install the front wheel tighten it to 103 Nm using a torque wrench combination with 300 mm (11.8 in.) fulcrum length and 22 mm (0.866 in.) union nut wrench. The union nut wrench should be parallel to the torque wrench.

OEM Scion xD Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Lines found

View related parts
Scion xD Flex Hose, Front Passenger Side
Part Number: 90947-02G34
$89.10 MSRP: $125.07
You Save: $35.97 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Rear Driver Side
Part Number: 90947-02G38
$46.71 MSRP: $65.02
You Save: $18.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Manufacturer Note: PAINTED=LIGHT BLUE
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Passenger Side
Part Number: 90947-02G36
$46.71 MSRP: $65.02
You Save: $18.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Manufacturer Note: PAINTED=RED
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Rear Driver Side
Part Number: 90947-02E10
$46.71 MSRP: $65.02
You Save: $18.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left, Rear Left Inner; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Manufacturer Note: PAINTED=PINK
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Front Driver Side
Part Number: 90947-02G35
$89.10 MSRP: $125.07
You Save: $35.97 (29%)
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2014 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Driver Side
Part Number: 90947-02E08
$82.82 MSRP: $116.25
You Save: $33.43 (29%)
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Scion xD | Base | 4 Cyl 1.8 L GAS
View related parts
Scion xD Flex Hose, Passenger Side
Part Number: 90947-02E07
$82.82 MSRP: $116.25
You Save: $33.43 (29%)
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Scion xD | Base | 4 Cyl 1.8 L GAS

Scion xD Brake Line

Choose genuine Brake Line that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Line for your Scion xD? Our website is your one-stop destination. We stock an extensive selection of genuine Scion xD parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Scion xD Brake Line is one of the hydraulic units that play a crucial role in the way the Scion xD car stops when the brake petal is pressed. Famous for the performance and durability Scion xD Brake Line is used to supply the brake fluid from the master cylinder to the brake caliper pistons also it forms one of the critical components of the vehicle safety system. Suitable for various Scion xD versions, this Brake Line is built to be resilient and to provide a proper performance throughout a car's usage. Originally the Scion xD has used the metal brake lines and rubber brake hoses, both having their weak points. Nevertheless, the introduction of the braided steel brake lines has brightened the market and has improved the pedal feel when driving most especially under hard rate. This feature makes the Scion xD Brake Line stand out because it enhances performance while at the same time being an aspect of efficiency. Furthermore, since out available prebent brake line kit is made of stainless steel which is not easily corroded means that Scion xD owners will be in a position to maintain their vehicle without a lot of hustle. Because of the various components used on its particular model, specifically the Scion xD Brake Line safety features such as the Anti-lock brakes and the electronic brake distribution, the automotive is remarkably notable on the market.

Scion xD Brake Line Parts and Q&A

Flex Hose, Rear Driver Side
90947-02E10
Q: How to remove the rear Brake Line on Scion xD?
A:
Start the process of removing the rear brake flexible hose by first removing the rear wheel followed by draining brake fluid while immediately cleaning painted areas that get in contact with fluid. When replacing the brake tubes use mountain-inclined and hand wrenches to divide the connections by gripping the flexible hose without endangering the brake tubes. This process should safeguard the tube end from interference from foreign substances. End the process by taking out both clips alongside the flexible hose from the axle beam.
Flex Hose, Driver Side
90947-02E08
Q: How to install the front Brake Line on Scion xD?
A:
Begin the installation of the front brake flexible hose through the union bolt and new gasket process while tightening it to 30 Nm (310 kgf-cm, 22 ft-lbf). Fasten the flexible hose by tightening it into position within the lock hole of the disc brake cylinder. The installation of these components starts with using a 29 Nm (300 kgf-cm, 22 ft-lbf) torque to fasten the bolt yet avoid twisting either component. You must use secure techniques for installing the flex hose tubing with its new clip followed by connecting the brake tube to the flexible hose using either a union nut wrench while holding the hose with a wrench or by strictly applying either 15 Nm (155 kgf-cm, 11 ft-lbf) torque or 14 Nm (144 kgf-cm, 10 ft-lbf) torque depending on whether you are using the union nut wrench or not. The designated torque setting of 29 Nm can be handled by a torque wrench measuring 300 mm (11.8 in.) which functions alongside a 22 mm (0.866 in.) union nut wrench that remains perpendicular to the torque tool. Post-installation requires brake fluid addition followed by a master cylinder bleeding sequence that includes a brake line bleeding operation and brake actuator bleeding service and a reservoir fluid level check as well as brake fluid leak detection. To install the front wheel tighten it to 103 Nm using a torque wrench combination with 300 mm (11.8 in.) fulcrum length and 22 mm (0.866 in.) union nut wrench. The union nut wrench should be parallel to the torque wrench.