OEM 2009 Scion xD ABS Control Module

2009 Scion xD Parts Questions & Experts Answers

• Q: How to remove the ABS Control Module for Antilock Brakes on 2009 Scion xD?

  A: Brake fluid draining represents the starting point for Hydraulic Control Assembly for Antilock Brakes removal which requires cleaning all affected painted areas of brake fluid residue. Begin by taking out the cowl top ventilator louver center as well as the battery followed by battery tray the battery carrier. This procedure does not include VSC systems so first release the lock lever and disconnect the brake actuator connector yet avoid letting brake fluid enter the connector. A union nut wrench helps detach 6 brake tubes from the brake actuator while labeling tubes for reinstallation; 1: Front wheel cylinder RH, 2: Front wheel cylinder LH, 3: Rear wheel cylinder RH, 4: Rear wheel cylinder LH, 5: 1st master cylinder, 6: 2nd master cylinder. Detach the brake actuator with bracket by removing the 3 bolts but avoid breaking the brake tubes or wire harness. Detach the actuator brackets by removing 3 bolts on both brake actuator assemblies with VSC. The initial procedures for separating brake tubes as well as disconnecting the actuator connector remain the same. Three bolts need to be removed to uninstall the brake actuator bracket assembly without VSC but four bolts need to be removed when dealing with the assembly that includes VSC functions.