OEM 2010 Scion xD ABS Control Module

2010 Scion xD Parts Questions & Experts Answers

• Q: How to remove the ABS Control Module for the Antilock Brakes on 2010 Scion xD?

  A: The first step to remove the Antilock Brakes Hydraulic Control Assembly requires fluid drainage before cleaning off all fluid that touches painted areas. The first step requires the removal of cowl top ventilator louver center followed by removal of battery and its tray and carrier. Disassembling the brake actuator requires users to first free the lock lever before disconnecting the brake actuator connector. Brake fluid must be avoided from entering the removed connector. The brake tubes can be separated using a union nut wrench while you label the order for reinstallation with 1: To front wheel cylinder RH, 2: To front wheel cylinder LH, 3: To rear wheel cylinder RH, 4: To rear wheel cylinder LH, 5: From 1st master cylinder and 6: From 2nd master cylinder. The following operation requires removing the 3 bolts which attach the brake actuator with bracket while maintaining care for brake tubes and wire harnesses. Complete the brake actuator bracket assembly removal by disassembling its 4 bolts.