×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Scion xD ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Control Modules found
2008 Scion xD Modulator Valve
Part Number: 44050-52821$1262.48 MSRP: $1589.22You Save: $326.74 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Replaces: 44050-52820
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.2 x 7.8 x 6.1 inches
- Condition: New
- SKU: 44050-52821
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xD Modulator Valve
Part Number: 44050-52800$770.77 MSRP: $970.25You Save: $199.48 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.0 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-52800
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Scion xD ABS Control Module
Looking for affordable OEM 2008 Scion xD ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Scion xD ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Scion xD ABS Control Module Parts Q&A
- Q: How to remove the ABS Control Module for Antilock Brakes on 2008 Scion xD?A: The Hydraulic Control Assembly for Antilock Brakes requires drain of brake fluid before deletion and requires limping all the contacting paint. Start the procedure by taking out the cowl top ventilator louver center followed by the battery and its tray and carrier. When removing the brake actuator assembly without Vehicle Stability system disconnect the connector while unlocking the lever but avoid letting brake fluid get inside. Use a union nut wrench to remove and label six brake tubes from the brake actuator. The first tube should be routed to the front wheel RH while the second goes to the front wheel LH and the third leads to the rear wheel RH followed by the fourth which goes to the rear wheel LH. The fifth tube should detach from the first master cylinder and the sixth does the same with the second master cylinder. You should remove the 3 bolts that secure the brake actuator with its bracket without damaging anything nearby. Brake actuator assembly with VSC requires the same preliminary procedures of disconnecting the actuator connector followed by breaking the brake tubes before removing the 3 bolts and brake actuator with bracket. For the brake actuator bracket assembly without VSC workers need to detach the 3 bolts but those performing work on assemblies with VSC must disconnect all 4 hardware pieces.