OEM 2009 Scion xB Sway Bar Kit

2009 Scion xB Parts Questions & Experts Answers

• Q: How to remove the front Sway Bar Kit on 2009 Scion xB?

  A: The removal process of the front sway bar kit begins with the removal of the No. 1 engine under cover and the No. 2 engine under cover and engine under cover rear LH and engine under cover rear RH. Steer the wheel until its tires point directly ahead before locking the wheel in place while working. Start by removing the column hole cover silencer sheet then divide the No. 2 steering intermediate shaft assembly and detach the No. 1 steering column hole cover sub-assembly. Begin by detaching the front wheels after which you should loosen then separate each of these parts: front lower No. 1 suspension arm sub-assembly LH and front lower No. 1 suspension arm sub-assembly RH. The technician should execute the same procedure to separate both the front sway bar link assembly LH and RH together with the tie rod end sub-assembly LH and RH. Federal Mogul service technicians need to remove the front suspension member reinforcement LH and RH and the rear LH and RH-facing front suspension member brace and front suspension crossmember sub-assembly. Remove the front lower No. 1 suspension arm sub-assembly LH before taking out the front suspension member front brace LH by uninstalling its 4 bolts. The same procedure applies to removing the front suspension member front brace on the right-hand side. Take away the front sway bar kit from the front suspension crossmember sub-assembly before removing the 2 No. 1 front sway bar bush fitted to the front sway bar kit.