How to Properly Install a Seat Belt Assembly on 2009 Scion xB?

Begin the front seat outer belt assembly installation by putting the front shoulder belt anchor adjuster assembly through the body hole with its hook and fasten it with two bolts that need a torque of 41 Nm (420 kgf-cm, 30 ft-lbf). After that, fasten the 2 claws to attach the shoulder belt anchor cover. Install the center pillar upper garnish as the subsequent step. When testing the retractor's angle of inclination for the RH front seat outer belt assembly ensure it locks at 45 degrees or more while locking at 15 degrees or less is not possible. Do not open up the retractor yet; proceed to replacement of the front seat outer belt if the tests result in failure. Complete the installation of the lower retractor stay to its body hooks by inserting two bolts and tighten bolt A to 5.0 Nm (51 kgf-cm, 44 in-lbf) while tightening bolt B to 41 Nm (420 kgf-cm, 30 ft-lbf). The installation of a through anchor requires a bolt torque to 41 Nm (420 kgf-cm, 30 ft-lbf) while a belt-installed ELR must lock when pulled straight out from the retractor. Replace the front seat outer belt if the locking mechanism fails. Study the pretensioner connector before secure locking its button while also picturing the wiring harness clamp and front seat belt tensioner sensor connector installation. Fasten the anchor plate with a bolt torque at 41 Nm (420 kgf-cm and 30 ft-lbf). You should duplicate this approach for installing the LH front seat outer belt component assembly. Begin by attaching the seat belt anchor cover cap through its three hooks and then apply the three hooks on lap belt outer anchor covers for both RH and LH sides. Mount the center pillar lower garnish and rear door opening trim Weather Strip as well as the front door opening trim Weather Strip before adding rear door scuff plate and front door scuff plate. The cable installation to the negative battery terminal requires a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) while checking for the SRS warning light illumination.

OEM 2009 Scion xB Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2009 Scion xB Buckle, Dark Gray/Black, Passenger Side
Part Number: 73230-12B40-C0
$34.76 MSRP: $48.39
You Save: $13.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Position: Passenger Side
- Replaces: 73230-12B40-B1
- Part Name Code: 73230
- Item Weight: 1.50 Pounds
- Item Dimensions: 14.1 x 11.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-12B40-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Buckle, Dark Gray/Black, Driver Side
Part Number: 73230-12B50-C0
$48.15 MSRP: $67.01
You Save: $18.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Position: Driver Side
- Replaces: 73230-12B50-B1
- Part Name Code: 73240
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.3 x 8.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-12B50-C0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Lap & Shoulder Belt, Dark Gray/Black, Driver Side
Part Number: 73220-12B71-B2
$223.20 MSRP: $318.68
You Save: $95.48 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Replaces: 73220-12B70-B0
- Part Name Code: 73220
- Item Weight: 4.70 Pounds
- Item Dimensions: 10.3 x 7.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73220-12B71-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Lap & Shoulder Belt, Dark Gray/Black, Passenger Side
Part Number: 73210-12B91-B2
$223.20 MSRP: $318.68
You Save: $95.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Replaces: 73210-12B90-B0
- Part Name Code: 73210
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-12B91-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Buckle, Dark Gray, Inner Driver Side
Part Number: 73480-12310-B0
$43.13 MSRP: $60.03
You Save: $16.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat, Inner Driver Side
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Inner Driver Side
- Part Name Code: 73390C
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73480-12310-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Lap & Shoulder Belt, Dark Gray, Center
Part Number: 73350-12271-B0
$174.97 MSRP: $249.82
You Save: $74.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat L; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt; Belt Assembly, Rear Seat, Outer Center
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Center
- Replaces: 73350-12270-B0
- Part Name Code: 73350C
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73350-12271-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Lap & Shoulder Belt, Dark Gray, Outer Driver Side
Part Number: 73370-12560-B0
$175.77 MSRP: $248.82
You Save: $73.05 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Belt Assembly, Rear Seat, Outer Driver Side
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Outer Driver Side
- Part Name Code: 73370C
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-12560-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Lap & Shoulder Belt, Dark Gray, Outer Passenger Side
Part Number: 73360-12870-B0
$137.12 MSRP: $194.12
You Save: $57.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Belt & Retractor; Belt Assembly, Rear Seat, Outer Passenger Side
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Outer Passenger Side
- Part Name Code: 73360C
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-12870-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Buckle, Dark Gray, Center
Part Number: 73380-12440-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear Right; Latch; Belt Assembly, Rear Seat, Inner Center
- Manufacturer Note: DK.GRAY,TRIM1#
- Position: Center
- Part Name Code: 73470A
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-12440-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Seat Belt

Looking for affordable OEM 2009 Scion xB Seat Belt? Explore our comprehensive catalogue of genuine 2009 Scion xB Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Seat Belt Parts Q&A

Q: How to Properly Install a Seat Belt Assembly on 2009 Scion xB?
A: Begin the front seat outer belt assembly installation by putting the front shoulder belt anchor adjuster assembly through the body hole with its hook and fasten it with two bolts that need a torque of 41 Nm (420 kgf-cm, 30 ft-lbf). After that, fasten the 2 claws to attach the shoulder belt anchor cover. Install the center pillar upper garnish as the subsequent step. When testing the retractor's angle of inclination for the RH front seat outer belt assembly ensure it locks at 45 degrees or more while locking at 15 degrees or less is not possible. Do not open up the retractor yet; proceed to replacement of the front seat outer belt if the tests result in failure. Complete the installation of the lower retractor stay to its body hooks by inserting two bolts and tighten bolt A to 5.0 Nm (51 kgf-cm, 44 in-lbf) while tightening bolt B to 41 Nm (420 kgf-cm, 30 ft-lbf). The installation of a through anchor requires a bolt torque to 41 Nm (420 kgf-cm, 30 ft-lbf) while a belt-installed ELR must lock when pulled straight out from the retractor. Replace the front seat outer belt if the locking mechanism fails. Study the pretensioner connector before secure locking its button while also picturing the wiring harness clamp and front seat belt tensioner sensor connector installation. Fasten the anchor plate with a bolt torque at 41 Nm (420 kgf-cm and 30 ft-lbf). You should duplicate this approach for installing the LH front seat outer belt component assembly. Begin by attaching the seat belt anchor cover cap through its three hooks and then apply the three hooks on lap belt outer anchor covers for both RH and LH sides. Mount the center pillar lower garnish and rear door opening trim Weather Strip as well as the front door opening trim Weather Strip before adding rear door scuff plate and front door scuff plate. The cable installation to the negative battery terminal requires a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) while checking for the SRS warning light illumination.

Related 2009 Scion xB Parts

Alternate Year Models

2008 Scion xB Seat Belt 2010 Scion xB Seat Belt