Other Name: Stay Assembly, Back Door; Liftgate Lift Support, Rear Left; Back Glass Lift Support; Door Lift Support; Stay Sub-Assembly, Back Door, Driver Side; Liftgate Lift Support; Lift Support
Position: Driver Side
Part Name Code: 68906
Item Weight: 1.40 Pounds
Item Dimensions: 25.1 x 3.0 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68960-12341
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Stay Assembly, Back Door; Liftgate Lift Support, Rear Right; Back Glass Lift Support; Door Lift Support; Stay Sub-Assembly, Back Door, Passenger Side; Liftgate Lift Support; Lift Support
Position: Passenger Side
Part Name Code: 68905B
Item Weight: 1.40 Pounds
Item Dimensions: 24.6 x 3.0 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68950-12521
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
Base | 4 Cyl 2.4 L GAS
2009 Scion xB Liftgate Lift Support
Looking for affordable OEM 2009 Scion xB Liftgate Lift Support? Explore our comprehensive catalogue of genuine 2009 Scion xB Liftgate Lift Support. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Scion xB Parts Questions & Experts Answers
Q: How to install the Liftgate Lift Support lower bracket for the back door damper stay on 2009 Scion xB?
A: Before mounting the back door damper stay lower bracket, users should clean the vehicle body threads with non-residue solvent followed by adhesive application to the 2 bolts through Toyota Genuine Adhesive 1324 or Three Bond 1324 or another suitable alternative. The bracket installation requires two bolts to be tightened to 7.0 Nm (71 kgf-cm, 62 in-lbf). Repeat the cleaning process of the threaded portion on the vehicle body and apply adhesive to the threads of the 2 back door damper stay upper bracket bolts before reinstalling them with correct torque specifications. Touching the rod stroke areas during back door stay assembly work must be avoided to stop foreign materials from attaching while gloves made of cotton or similar materials should be avoided along with the application of horizontal forces that can result in cylinder deformation. Proceed with installing the stop ring to the back door stay assembly when supporting the back door with hand motion.