OEM 2009 Scion tC Vapor Canister

2009 Scion tC Vapor Canister Parts Q&A

• Q: How to install the Vapor Canister on 2009 Scion tC?

  A: The Evaporative Emission Control Canister installation begins with attaching the canister filter sub-assembly through a bolt secured at 8.0 Nm (82 kgf-cm, 71 in-lbf) torque value then connecting the two hoses. The next step involves attaching the canister assembly through a temporary process when the claw on the canister bracket hooks onto the fuel tank hoses before tightening its 2 bolts to 19 Nm (194 kgf-cm, 14 ft-lbf). You must perform the fuel vent hose installation by connecting the pipe to the fuel tube connector while raising the retainer to seal the claws. Verify the secure connection by performing a pull test on the fuel tube connector and pipe due to the necessity of checking for scratches or any foreign objects in the connected area. The process of connecting the fuel tank vent hose requires users to line up the fuel tank vent connector with the pipe before pushing it in until it clicks to demonstrate proper attachment. The quick connector requires two checks for scratches and foreign objects before you verify its secure connection by performing a pull operation. After installation of the fuel emission hose there must be 2 clamps followed by the leak detection pump connector. Next install the rear suspension brace lower RH followed by the No. 1 fuel tank protector then the center exhaust pipe assembly and complete with the front floor panel brace. When operating is complete, attach the cable to the negative battery terminal then execute initialization because system demands this following battery cable replugging. You should perform a final inspection of exhaust gas leaks.