OEM 2008 Scion tC Vapor Canister

2008 Scion tC Vapor Canister Parts Q&A

• Q: How to install the Vapor Canister on 2008 Scion tC?

  A: Following the installation of the canister filter sub-assembly with a bolt to 8.0 Nm (82 kgf-cm, 71 in-lbf) torque set, connect its two hoses. Hanging the canister bracket claw onto the fuel tank hoses enables installation of the canister through two bolts tightened to 19 Nm (194 kgf-cm, 14 ft-lbf). Afterward, install the fuel vent hose. Check for scratches or foreign objects around the connection before proceeding because the retainer must be pushed up to lock the claws as you attach the pipe to the fuel tube connector. To properly attach the fuel tank vent hose pull both the fuel tube connector and the pipe firmly before linking the ventilator section to the piping until a clicking sound occurs. The fuel emission hose requires two clamps for installation along with the leak detection pump connector. You should proceed to install the rear suspension brace lower RH followed by the No. 1 fuel tank protector and the center exhaust pipe assembly before completing with the front floor panel brace. The system initialization must follow after connecting the cable to the negative battery terminal since system functions demand battery terminal initialization. As the last step, test for exhaust gas leakage.