How to install the Mass Air Flow Sensor on 2008 Scion tC?

When installing the Mass Air Flow Sensor on the 2AZ-FE engine control system you should fasten it using 2 screws while making sure the O-ring does not become damaged or stuck during installation. Install the Mass Air Flow Sensor connector as the second stage of installation. The cable needs to be attached to the negative terminal of the battery after installation. The procedure ends with initialization which certain systems need when disconnecting then re-connecting the negative (-) battery terminal cable.

OEM 2008 Scion tC Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2008 Scion tC Meter Sub-Assembly, Intake Air Flow
Part Number: 22204-31020
$135.47 MSRP: $191.77
You Save: $56.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Replaces: 22204-0P010, 22204-0H010, 22204-31010
- Part Name Code: 22204
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.4 x 7.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22204-31020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2008 Scion tC Mass Air Flow Sensor

Looking for affordable OEM 2008 Scion tC Mass Air Flow Sensor? Explore our comprehensive catalogue of genuine 2008 Scion tC Mass Air Flow Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion tC Parts Questions & Experts Answers

Q: How to install the Mass Air Flow Sensor on 2008 Scion tC?
A: When installing the Mass Air Flow Sensor on the 2AZ-FE engine control system you should fasten it using 2 screws while making sure the O-ring does not become damaged or stuck during installation. Install the Mass Air Flow Sensor connector as the second stage of installation. The cable needs to be attached to the negative terminal of the battery after installation. The procedure ends with initialization which certain systems need when disconnecting then re-connecting the negative (-) battery terminal cable.