How to install the Camshaft Position Sensor on 2008 Scion tC?

Before adding the Camshaft Position Sensor for 2AZ-FE engine control system start by checking the O-ring for any damage or blockage. Dip the O-ring in engine oil before fitting the sensor by bolt which needs a torque of 9.0 Nm (90 kgf-cm, 80 in-lbf). Next, connect the sensor connector. To complete the installation you need to install the air cleaner cap afterward. Finally check for any oil leakage by reconnecting the cable to the negative battery terminal. Then, install the engine cover. Complete the initialization process because specific systems call for it after moving the cable between the negative (-) battery terminal and removal.

OEM 2008 Scion tC Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Scion tC Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 2.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19014
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2008 Scion tC Camshaft Position Sensor

Looking for affordable OEM 2008 Scion tC Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2008 Scion tC Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion tC Parts Questions & Experts Answers

Q: How to install the Camshaft Position Sensor on 2008 Scion tC?
A: Before adding the Camshaft Position Sensor for 2AZ-FE engine control system start by checking the O-ring for any damage or blockage. Dip the O-ring in engine oil before fitting the sensor by bolt which needs a torque of 9.0 Nm (90 kgf-cm, 80 in-lbf). Next, connect the sensor connector. To complete the installation you need to install the air cleaner cap afterward. Finally check for any oil leakage by reconnecting the cable to the negative battery terminal. Then, install the engine cover. Complete the initialization process because specific systems call for it after moving the cable between the negative (-) battery terminal and removal.