How to replace the Camshaft Position Sensor on Scion tC?

Begin by disconnecting the negative battery terminal before Installing the Camshaft Position Sensor because initialization of power windows along with sliding roof will be required following reconnection. Disassembly of the engine cover sub-assembly No.1 enables sensor connector separation for removal of the camshaft position sensor bolt and sensor component. A thin layer of engine oil should be applied to the O-ring of the new sensor before installation using the bolt at 9.0 N.m (90 kgf.cm, 80 in.lbf) while ensuring proper O-ring condition. After reattaching the camshaft position sensor connector it is important to tighten the battery negative terminal at 5.4 N.m (55 kgf.cm, 48 in.lbf). To finish the task check for oil leakage at the engine and reinstall engine cover sub-assembly No.1.

OEM Scion tC Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
Scion tC Sensor, Camshaft Position
Part Number: 90080-19014
$66.23 MSRP: $79.06
You Save: $12.83 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2010 Scion tC | Base, Spec | 4 Cyl 2.4 L GAS
View related parts
Scion tC Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$97.75 MSRP: $137.21
You Save: $39.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2016 Scion tC | Base | 4 Cyl 2.5 L GAS

Scion tC Camshaft Position Sensor

If you're thinking about purchasing OEM parts for your Scion tC, our website is your one-stop destination. We stock an extensive selection of genuine Scion tC Camshaft Position Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion tC Camshaft Position Sensor Parts Questions & Experts Answers

Sensor, Camshaft Position
90080-19014
Q: How to replace the Camshaft Position Sensor on Scion tC?
A: Begin by disconnecting the negative battery terminal before Installing the Camshaft Position Sensor because initialization of power windows along with sliding roof will be required following reconnection. Disassembly of the engine cover sub-assembly No.1 enables sensor connector separation for removal of the camshaft position sensor bolt and sensor component. A thin layer of engine oil should be applied to the O-ring of the new sensor before installation using the bolt at 9.0 N.m (90 kgf.cm, 80 in.lbf) while ensuring proper O-ring condition. After reattaching the camshaft position sensor connector it is important to tighten the battery negative terminal at 5.4 N.m (55 kgf.cm, 48 in.lbf). To finish the task check for oil leakage at the engine and reinstall engine cover sub-assembly No.1.