Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Toyota Tundra Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2008 Toyota Tundra Steering Knuckle - 43212-0C012
    2008 Toyota Tundra Steering Knuckle - 43212-0C012
    2008 Toyota Tundra Steering Knuckle - 43212-0C012
    2008 Toyota Tundra Steering Knuckle - 43212-0C012
    2008 Toyota Tundra Steering Knuckle Diagram - 43212-0C012
    View related parts

    2008 Toyota Tundra Knuckle, Driver Side

    Part Number: 43212-0C012
    $589.51 MSRP: $863.93
    You Save: $274.42 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering, Left; Steering Knuckle, Front Left, Left; Knuckle, Steering, Driver Side
    • Position: Driver Side
    • Part Name Code: 43212
    • Item Weight: 12.20 Pounds
    • Item Dimensions: 17.2 x 10.6 x 7.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43212-0C012
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Tundra Submodels:
    • 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
  • 2008 Toyota Tundra Steering Knuckle - 43211-0C012
    2008 Toyota Tundra Steering Knuckle - 43211-0C012
    2008 Toyota Tundra Steering Knuckle - 43211-0C012
    2008 Toyota Tundra Steering Knuckle Diagram - 43211-0C012
    View related parts

    2008 Toyota Tundra Knuckle, Passenger Side

    Part Number: 43211-0C012
    $567.83 MSRP: $832.16
    You Save: $264.33 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering, Right; Steering Knuckle, Front Right, Right; Knuckle, Steering, Passenger Side
    • Position: Passenger Side
    • Part Name Code: 43211
    • Item Weight: 19.20 Pounds
    • Item Dimensions: 17.7 x 10.4 x 7.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43211-0C012
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Tundra Submodels:
    • 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Steering Knuckle

Looking for affordable OEM 2008 Toyota Tundra Steering Knuckle? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Steering Knuckle. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Steering Knuckle Parts Q&A

  • Q: How to install the steering knuckle on the LH side on 2008 Toyota Tundra?
    A: First install the new knuckle grease retainer cap on the LH side of the steering knuckle by using a brass bar and hammer but avoid damaging the cap because it is non-reusable. Heat up the steering knuckle oil seal with Special Service Tool: 09950-60020 and 09951-01030 and carefully insert it without damaging the non-reusable seal. The installation of the steering knuckle LH starts with attaching the front suspension upper arm using a nut torqued to 110 Nm and then installing a new clip while readjusting the nut to achieve alignment of clip holes. Install the front lower ball joint attachment LH while fastening the tie rod end sub-assembly LH. To complete installation attach the front axle hub sub-assembly LH and connect the front speed sensor LH to the steering knuckle using a bolt which requires 11 Nm (107 kgf-cm, 8 ft-lbf) torque before installing the clip. Mount the front wheel while applying 131 Nm torque for aluminum wheels and 209 Nm torque for steel wheels. Connect the cable to the negative battery terminal and watch for system initialization requirements which might apply. The maintenance procedure ends with testing the speed sensor signal alongside SRS warning light evaluation followed by any necessary front wheel alignment inspection and adjustments.

Related 2008 Toyota Tundra Parts

Alternate Year Models

+
2007 Toyota Tundra Steering Knuckle 2009 Toyota Tundra Steering Knuckle