How to reassemble the front lower Control Arm on 2008 Toyota Tundra?

Installation of the No. 1 spring bumper LH to the vehicle starts by applying 31 Nm (316 kgf-cm, 23 ft-lbf) torque. The installation of new front No. 2 lower arm LH bush requires Special Service Tools 09710-26011 and 09710-05081 together with a press to press a bush into place with bush positioning protrusions perpendicular to the lower arm. A new bush for the front No. 1 lower arm bush LH is inserted through Special Service Tools 09223-00010 and 09612-30012 while using a press. Combining the front lower ball joint attachment LH to its nut and new cotter pin requires a torque of 167 Nm (1703 kgf-cm, 123 ft-lbf) until the cotter pin holes reach proper alignment if necessary, increase the nut torque to 60 degrees.

OEM 2008 Toyota Tundra Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arms found

View related parts
2008 Toyota Tundra Upper Control Arm, Driver Side
Part Number: 48630-0C011
$294.97 MSRP: $421.15
You Save: $126.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Control Arm Assembly; Arm Assembly, Front Suspension, Upper Driver Side; Control Arm
- Position: Upper Driver Side
- Replaces: 48630-0C010
- Part Name Code: 48630
- Item Weight: 20.80 Pounds
- Item Dimensions: 14.3 x 13.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Upper Control Arm, Passenger Side
Part Number: 48610-0C011
$294.97 MSRP: $421.15
You Save: $126.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Control Arm
- Position: Passenger Side
- Replaces: 48610-0C010
- Part Name Code: 48610
- Item Weight: 10.00 Pounds
- Item Dimensions: 18.5 x 5.8 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Lower Control Arm, Passenger Side
Part Number: 48068-09100
$274.60 MSRP: $392.07
You Save: $117.47 (30%)
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 30.60 Pounds
- Item Dimensions: 23.5 x 22.9 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-09100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Lower Control Arm, Driver Side
Part Number: 48069-09090
$277.00 MSRP: $395.49
You Save: $118.49 (30%)
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 27.80 Pounds
- Item Dimensions: 21.7 x 7.2 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-09090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Lower Control Arm, Front Driver Side
Part Number: 48069-0C020
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left Lower; Control Arm Assembly; Control Arm
- Position: Front Lower Driver Side
- Condition: New
- SKU: 48069-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Lower Control Arm, Front Passenger Side
Part Number: 48068-0C020
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right Lower; Control Arm Assembly; Control Arm
- Position: Front Lower Passenger Side
- Condition: New
- SKU: 48068-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Control Arm

Looking for affordable OEM 2008 Toyota Tundra Control Arm? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Control Arm Parts Q&A

Q: How to reassemble the front lower Control Arm on 2008 Toyota Tundra?
A: Installation of the No. 1 spring bumper LH to the vehicle starts by applying 31 Nm (316 kgf-cm, 23 ft-lbf) torque. The installation of new front No. 2 lower arm LH bush requires Special Service Tools 09710-26011 and 09710-05081 together with a press to press a bush into place with bush positioning protrusions perpendicular to the lower arm. A new bush for the front No. 1 lower arm bush LH is inserted through Special Service Tools 09223-00010 and 09612-30012 while using a press. Combining the front lower ball joint attachment LH to its nut and new cotter pin requires a torque of 167 Nm (1703 kgf-cm, 123 ft-lbf) until the cotter pin holes reach proper alignment if necessary, increase the nut torque to 60 degrees.