How to reassemble the front shock absorber on 2008 Toyota Tundra?

The front coil spring LH needs compression using Special Service Tools: 09727-30021, 09727-00010, 09727-00021, and 09727-00031 before installation. Slight delta compression of the coil spring is permissible but an impact wrench usage must be excluded to avoid tool damage. Take the coil spring to the shock absorber and place its lower end inside the spring seat recess. Install two retainers and two cushions before placing the suspension support onto the piston rod where it should secure a new support to the front shock absorber. Keep the support in the proper location as shown. The technician should check the suspension support position while releasing the coil spring but must never use an impact wrench after removing the special service tool to safeguard the shock absorber rod from damage. The torque on the front shock absorber nut should be set to 25 Nm (255 kgf-cm, 18 ft-lbf).

OEM 2008 Toyota Tundra Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48510-09897
$157.20 MSRP: $222.55
You Save: $65.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly Set, S; Shock Absorber, Front; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side
- Manufacturer Note: MARK 48510-0C200,COLD AREA SPEC
- Replaces: 48510-09Q50, 48510-09Q80, 48510-09R20, 48510-09895
- Item Weight: 8.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09897
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48510-09Q70
$155.56 MSRP: $220.22
You Save: $64.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09Q70
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48510-09R30
$154.15 MSRP: $218.22
You Save: $64.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 1.80 Pounds
- Item Dimensions: 27.1 x 8.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09R30
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48510-09Q90
$154.15 MSRP: $218.22
You Save: $64.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.10 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09Q90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48510-09R10
$146.04 MSRP: $206.74
You Save: $60.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.80 Pounds
- Item Dimensions: 26.9 x 8.2 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09R10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09N50
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09N40
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 25.8 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09M90
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C010,OFFROAD PACKAGE
- Item Weight: 6.90 Pounds
- Item Dimensions: 26.4 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09M80
$69.90 MSRP: $98.13
You Save: $28.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C080
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09N10
$68.01 MSRP: $95.46
You Save: $27.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C060
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Shock Absorber
Part Number: 48530-09N20
$70.85 MSRP: $99.45
You Save: $28.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C020,OFFROAD PACKAGE
- Item Weight: 7.00 Pounds
- Item Dimensions: 26.9 x 6.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Shock Absorber

Looking for affordable OEM 2008 Toyota Tundra Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to reassemble the front shock absorber on 2008 Toyota Tundra?
A: The front coil spring LH needs compression using Special Service Tools: 09727-30021, 09727-00010, 09727-00021, and 09727-00031 before installation. Slight delta compression of the coil spring is permissible but an impact wrench usage must be excluded to avoid tool damage. Take the coil spring to the shock absorber and place its lower end inside the spring seat recess. Install two retainers and two cushions before placing the suspension support onto the piston rod where it should secure a new support to the front shock absorber. Keep the support in the proper location as shown. The technician should check the suspension support position while releasing the coil spring but must never use an impact wrench after removing the special service tool to safeguard the shock absorber rod from damage. The torque on the front shock absorber nut should be set to 25 Nm (255 kgf-cm, 18 ft-lbf).

Related 2008 Toyota Tundra Parts

Alternate Year Models

2007 Toyota Tundra Shock Absorber 2009 Toyota Tundra Shock Absorber