How to service and repair the front shock absorber on 2007 Toyota Tundra?

The service and repair process for the front shock absorber starts with front wheel removal before detaching the shock absorber with coil spring from the LH side by lowering the lower-side bolt nut and bolt while keeping the bolt in place to prevent assembly drop followed by removing four lower bolts and nuts. The shock absorber assembly needs disassembly through the use of Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) to compress the coil spring until the suspension support becomes free from compression and not reaching dangerous levels before removing the front support to front shock absorber nut and continuing with the suspension support and retainers and cushions from the shock absorber rod and ending with removal of the coil spring from the shock absorber. Multiple compressions and extensions of the shock absorber rod will help you inspect the front shock absorber assembly for abnormal resistance or noise until you determine a replacement is needed. Use the same Special Service Tool to compress the front coil spring until its lower end fits into the spring seat before adding the suspension support with retainers, briefly installing a new support onto the front shock absorber nut, properly positioning it, and removing the Special Service Tool without using an impact wrench. Install the front shock absorber with coil spring onto the chassis frame and lower suspension arm and lower the vehicle and press down multiple times before tightening the shock absorber nut to 195 Nm (1988 kgf-cm, 144 ft. lbs.) and all four upper nuts to 45 Nm (459 kgf-cm, 33 ft. lbs.) with the first nut at its specified torque value. The front wheel installation requires 131 Nm (1336 kgf-cm, 97 ft. lbs.) torque for aluminum wheels whereas steel wheels need 209 Nm (2131 kgf-cm, 154 ft. lbs.). To dispose of the shock absorber properly extend the rod completely then use proper safety equipment to drill a hole in the cylinder because off-road type shock absorbers contain higher gas pressure while the gas itself is nonpoisonous and without color or odor.

OEM 2007 Toyota Tundra Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48510-09897
$157.20 MSRP: $222.55
You Save: $65.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly Set, S; Shock Absorber, Front; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side
- Manufacturer Note: MARK 48510-0C200,COLD AREA SPEC
- Replaces: 48510-09Q50, 48510-09Q80, 48510-09R20, 48510-09895
- Item Weight: 8.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09897
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48510-09Q70
$155.56 MSRP: $220.22
You Save: $64.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.90 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09Q70
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48510-09R30
$154.15 MSRP: $218.22
You Save: $64.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 1.80 Pounds
- Item Dimensions: 27.1 x 8.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09R30
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48510-09Q90
$154.15 MSRP: $218.22
You Save: $64.07 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.10 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09Q90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48510-09R10
$146.04 MSRP: $206.74
You Save: $60.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Strut; Absorber Assembly, Shock, Front Passenger Side; Absorber Assembly, Shock, Front Driver Side; Shock
- Item Weight: 9.80 Pounds
- Item Dimensions: 26.9 x 8.2 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-09R10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09N50
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N50
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09N40
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 25.8 x 6.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N40
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09M90
$70.14 MSRP: $98.45
You Save: $28.31 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C010,OFFROAD PACKAGE
- Item Weight: 6.90 Pounds
- Item Dimensions: 26.4 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M90
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09M80
$69.90 MSRP: $98.13
You Save: $28.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C080
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09M80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09N10
$68.01 MSRP: $95.46
You Save: $27.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C060
- Item Weight: 6.80 Pounds
- Item Dimensions: 26.4 x 6.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2007 Toyota Tundra Shock Absorber
Part Number: 48530-09N20
$70.85 MSRP: $99.45
You Save: $28.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock; Suspension Kit; Strut Assembly; Shock Absorber; Strut Kit; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48530-0C020,OFFROAD PACKAGE
- Item Weight: 7.00 Pounds
- Item Dimensions: 26.9 x 6.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48530-09N20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2007 Toyota Tundra Shock Absorber

Looking for affordable OEM 2007 Toyota Tundra Shock Absorber? Explore our comprehensive catalogue of genuine 2007 Toyota Tundra Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Tundra Parts Questions & Experts Answers

Q: How to service and repair the front shock absorber on 2007 Toyota Tundra?
A: The service and repair process for the front shock absorber starts with front wheel removal before detaching the shock absorber with coil spring from the LH side by lowering the lower-side bolt nut and bolt while keeping the bolt in place to prevent assembly drop followed by removing four lower bolts and nuts. The shock absorber assembly needs disassembly through the use of Special Service Tool: 09727-30021 (09727-00010, 09727-00021, 09727-00031) to compress the coil spring until the suspension support becomes free from compression and not reaching dangerous levels before removing the front support to front shock absorber nut and continuing with the suspension support and retainers and cushions from the shock absorber rod and ending with removal of the coil spring from the shock absorber. Multiple compressions and extensions of the shock absorber rod will help you inspect the front shock absorber assembly for abnormal resistance or noise until you determine a replacement is needed. Use the same Special Service Tool to compress the front coil spring until its lower end fits into the spring seat before adding the suspension support with retainers, briefly installing a new support onto the front shock absorber nut, properly positioning it, and removing the Special Service Tool without using an impact wrench. Install the front shock absorber with coil spring onto the chassis frame and lower suspension arm and lower the vehicle and press down multiple times before tightening the shock absorber nut to 195 Nm (1988 kgf-cm, 144 ft. lbs.) and all four upper nuts to 45 Nm (459 kgf-cm, 33 ft. lbs.) with the first nut at its specified torque value. The front wheel installation requires 131 Nm (1336 kgf-cm, 97 ft. lbs.) torque for aluminum wheels whereas steel wheels need 209 Nm (2131 kgf-cm, 154 ft. lbs.). To dispose of the shock absorber properly extend the rod completely then use proper safety equipment to drill a hole in the cylinder because off-road type shock absorbers contain higher gas pressure while the gas itself is nonpoisonous and without color or odor.

Related 2007 Toyota Tundra Parts

Alternate Year Models

2006 Toyota Tundra Shock Absorber 2008 Toyota Tundra Shock Absorber