Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
2008 Toyota Tacoma Car Speakers
Looking for affordable OEM 2008 Toyota Tacoma Car Speakers? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Tacoma Parts Questions & Experts Answers
Q: How to install the front door Car Speakers on the LH side on 2008 Toyota Tacoma?
A: The installation procedures for the front door speaker (except Regular Cab) work identically for both right-hand and left-hand sides but these instructions apply to the left-hand side only. Begin with the installation of front No. 2 speaker assembly by inserting the claw then using 2 bolts torqued to 8.4 Nm (85 kgf-cm, 74 in-lbf) to lock it before wiring the connector. Proceed with the installation of the front No. 1 speaker assembly by putting in 4 screws before connecting the connector. The next service step should involve installing the front door trim panel assembly LH followed by the front door lower frame bracket garnish LH. The power window regulator master switch assembly should receive installation according to the specified model type (single or double cab). The front door window regulator handle assembly without power door lock needs installation as the final step. Secure the cable at the negative battery terminal by tightening it to 3.9 Nm (40 kgf-cm, 35 in-lbf).