Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2007 Toyota Tacoma Submodels:
Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
2007 Toyota Tacoma Car Speakers
Looking for affordable OEM 2007 Toyota Tacoma Car Speakers? Explore our comprehensive catalogue of genuine 2007 Toyota Tacoma Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2007 Toyota Tacoma Parts Questions & Experts Answers
Q: How to remove and install the Front No. 1 Car Speakers (Except Regular Cab) on 2007 Toyota Tacoma?
A: The first step to remove the Front No. 1 Speaker (Except Regular Cab) requires disconnecting the negative battery cable terminal. To service the LH side first detach the front door window regulator handle assembly (without Power Door Lock) then disconnect the power window regulator master switch assembly (with Power Door Lock). Begin by removing both the front door lower frame bracket garnish on the left-hand side and the front door trim panel assembly from the same side. The four screws must be removed after disconnecting the connector for the front No. 1 speaker assembly to be taken out. The first step for installation consists of putting the front No. 1 speaker assembly in place with the four screws while reattaching the connector. Reinstall the front door trim panel assembly LH and the front door lower frame bracket garnish LH after which you should attach the power window regulator master switch assembly (with Power Door Lock) and then the front door window regulator handle assembly (without Power Door Lock). Reattach the cable to the negative battery terminal while applying force with a torque of 3.9 N.m (40 kgf.cm, 35 in.lbf).