Other Name: Speaker Assembly, Radio; Speaker Assembly, Rear
Manufacturer Note: RH
Position: Rear Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2001-2004 Toyota Tacoma | Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
| Page 1 of 2 |Next >
1-20 of 38 Results
Toyota Tacoma Car Speakers
If you're thinking about purchasing OEM parts for your Toyota Tacoma, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma Car Speakers at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Tacoma Car Speakers Parts Questions & Experts Answers
Q: How to remove and install the Front No. 2 Car Speakers on Toyota Tacoma?
A: Disconnecting the cable from the negative battery terminal must be the first step for Front No. 2 Speaker removal. The removal process starts by disassembling the front door window regulator handle assembly if the vehicle does not have a power door lock function but it requires the power window regulator master switch assembly removal if the vehicle includes power door lock capabilities. The installation of the front No. 2 speaker demands that you first remove the front door lower frame bracket garnish LH and the front door trim panel assembly LH. First disconnect the connector from the front No. 2 speaker assembly then untighten the 2 bolts before disengaging the claw to remove the assembly. To install the front No. 2 speaker assembly use the 2 bolts and engage the claw then apply torque at 8.4 N.m (85 kgf.cm, 74 in.lbf). Proceed with connector connection before reinstalling the front door trim panel assembly LH together with the front door lower frame bracket garnish LH as well as the power window regulator master switch assembly (for power door lock vehicles) and the front door window regulator handle assembly (for vehicles without power door lock). Complete the terminal connection to the negative battery terminal by tightening the cable with 3.9 N.m (40 kgf.cm, 35 in.lbf).