My Garage
Cart
Make sure this part fits

Toyota 86160-AA382
Front Driver Speaker

2003-2010 Toyota 86160AA382

Customer Questions & Expert Answers (31)
Toyota 86160-AA382 Front Driver Speaker
Toyota 86160-AA382 Front Driver Speaker
  • Part Description
    Speaker Assembly, Radio; Speaker, Center, Front, Front Lower
  • Part Name Code
    86160
  • Replaces
    86160-AA381, 86160-AA380
  • Manufacturer
    Toyota
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code86160
    Manufacturer Part Number86160-AA382
    Part DescriptionSpeaker Assembly, Radio; Speaker, Center, Front, Front Lower
    Other NamesSpeaker Assembly, Front
    Item Dimensions19.3 x 14.0 x 3.3 inches
    Item Weight4.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces86160-AA381, 86160-AA380
    Require Quantity2
    ManufacturerToyota
    SKU86160-AA382
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2009 Toyota 4RunnerLimited, Sport, SR56 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
    2005-2006 Toyota CamryBase, LE, SE, XLE4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    2004-2010 Toyota SiennaCE, LE, Limited, XLE, XLE Limited6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2004-2008 Toyota SolaraSE, SLE, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
    2005-2008 Toyota TacomaBase, Pre Runner, X-Runner4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 86160-AA382 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 86160-AA382 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be removed after the Front Door Lower Frame Bracket Garnish LH for the 2004 Toyota 4Runner? Posted by Customer
    A:
    Take out the Front Door Inside Handle Bezel LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done before removing the W/Box Speaker Assembly No.1 for the 2006 Toyota 4Runner? Posted by Customer
    A:
    Disconnect the connectors and remove the 5 bolts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear speaker assembly for the 2005 Toyota Camry? Posted by Customer
    A:
    First, remove the rear seat cushion assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after removing the components listed for the 2003 Toyota 4Runner? Posted by Customer
    A:
    Remove the deck trim side panel assy LH and the roof side garnish assy inner LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be installed after the deck floor box LH for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Install the rear floor mat support plate rear.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What follows after removing the deck board sub-assembly for the 2008 Toyota 4Runner? Posted by Customer
    A:
    Remove the deck board assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What comes after the deck floor box RH for the 2009 Toyota 4Runner? Posted by Customer
    A:
    The deck trim cover rear.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step to remove Rear Speaker Assembly No.2 for the 2005 Toyota 4Runner? Posted by Customer
    A:
    Disconnect the connector and remove the 2 bolts to take out Rear Speaker Assembly No.2.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What do you need to do after removing the rear door trim board sub-assembly LH for the 2007 Toyota 4Runner? Posted by Customer
    A:
    Disconnect the connector and remove the 3 screws securing the rear speaker.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be installed after the rear floor mat support plate rear for the 2007 Toyota 4Runner? Posted by Customer
    A:
    The deck board assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the process to install the new Front No.1 Speaker Assembly for the 2006 Toyota Camry? Posted by Customer
    A:
    Secure it with the 4 screws in the specified order and reconnect the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to remove the Front No. 1 Speaker for the 2007 Toyota Sienna? Posted by Customer
    A:
    Take off the front door lower frame bracket garnish.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What does removing these components allow access to for the 2005 Toyota Sienna? Posted by Customer
    A:
    It allows access to the Front No.1 Speaker Assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be removed after the Front Door Lower Frame Bracket Garnish LH for the 2004 Toyota Sienna? Posted by Customer
    A:
    Take out the Front Door Inside Handle Bezel Plug LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What components need to be removed after the cowl side trim sub-assembly LH for the 2005 Toyota Solara? Posted by Customer
    A:
    The rear seat assembly, center pillar upper end weatherstrip LH, cup holder No.2, quarter trim panel sub-assembly upper LH, quarter trim panel lower LH, and front door opening trim weatherstrip LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step in the installation process for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Install the front door window regulator handle assembly without the power door lock, then connect the cable to the negative battery terminal, torqued to 3.9 Nm (40 kgf-cm, 35 in-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you install the front No.1 speaker assembly for the 2006 Toyota Solara? Posted by Customer
    A:
    Position the front No.1 speaker assembly and secure it with the 4 screws, ensuring they are installed in the specified order, and then reconnect the connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What tool is needed to secure the stereo component amplifier assembly for the 2008 Toyota Tacoma? Posted by Customer
    A:
    A torx socket wrench T20.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you finally remove the rear speaker assembly for the 2006 Toyota Solara? Posted by Customer
    A:
    Disconnect the connector and remove the 4 screws.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear speaker assembly on the coupe for the 2004 Toyota Solara? Posted by Customer
    A:
    Begin by removing the rear seat assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after reconnecting the connector for the 2007 Toyota Sienna? Posted by Customer
    A:
    Reinstall the quarter trim front panel assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to remove the No. 1 speaker with box for the 2006 Toyota Tacoma? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be removed after the quarter trim panel assemblies for the 2007 Toyota Solara? Posted by Customer
    A:
    Remove the center pillar garnishes for both sides.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the W/Box Speaker Assembly No.1 for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you disconnect the Front No. 2 speaker assembly for the 2007 Toyota Tacoma? Posted by Customer
    A:
    Disconnect the connector from the front No. 2 speaker assembly, remove the 2 bolts, and disengage the claw.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the roof side garnish assembly for the 2008 Toyota Solara? Posted by Customer
    A:
    Remove the quarter trim panel upper for both the LH and RH sides, followed by the package tray trim panel assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after removing the back door scuff plate for the 2006 Toyota Sienna? Posted by Customer
    A:
    Next, take out the quarter trim front panel assembly LH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step for removing the No. 2 speaker assembly with box for the 2009 Toyota Sienna? Posted by Customer
    A:
    Disconnect the connector and remove the 5 bolts to complete the removal process.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What comes next after the rear door weatherstrip for the 2008 Toyota Sienna? Posted by Customer
    A:
    Followed by the back door weatherstrip and back door scuff plate.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the order of components to reinstall after the front door trim panel assembly for the 2007 Toyota Tacoma? Posted by Customer
    A:
    Front door lower frame bracket garnish LH, power window regulator master switch assembly (with Power Door Lock), and finally the front door window regulator handle assembly (without Power Door Lock).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 86160-AA382, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 86160-AA382 Front Driver Speaker. It is sometimes referred to as Toyota Car Speakers. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 86160AA382 Front Driver Speaker. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery