How to install the front Sway Bar Kit on 2008 Toyota Solara?

The first step to install the front sway bar kit involves attaching it directly onto the vehicle structure. Install the bush to the outer side of each bush stopper by placing its cutout section toward the rear of the sway bar kit. Install the rack & pinion power steering gear assembly followed by the pressure feed tube assembly and the steering gear outlet return tube and steering intermediate shaft assembly in order. The next step after finishing the left-hand side tie rod installation is to perform the right-hand side installation with the same procedures. Use 2 bolts to fasten the front sway bar bracket No. 1 on the left side while torquing at 27 Nm (275 kgf-cm, 20 ft-lbf) then attach the right-hand bracket with the same method. Lay the front sway bar link assembly onto the left side while securing it with 2 nuts to reach a torque setting of 74 Nm (755 kgf-cm, 55 ft-lbf). Prevent the ball joint from spinning by gripping its stud with a hexagon wrench (6 mm) prior to reinstallation of the right-hand assembly. The installation of the front wheel must be followed by torque application at 103 Nm (1,050 kgf-cm, 76 ft-lbf). Power steering fluid bleeding is necessary followed by leak inspection then front wheel alignment correction and steering wheel center adjustment.

OEM 2008 Toyota Solara Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Kits found

View related parts
2008 Toyota Solara Stabilizer Bar, Front
Part Number: 48811-AA060
$137.70 MSRP: $194.92
You Save: $57.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.80 Pounds
- Item Dimensions: 44.2 x 12.1 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AA060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
2008 Toyota Solara Stabilizer Bar, Front
Part Number: 48811-AA020
$130.88 MSRP: $185.29
You Save: $54.41 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OD=23
- Position: Front
- Replaces: 48811-33130
- Part Name Code: 48811
- Item Weight: 7.50 Pounds
- Item Dimensions: 45.0 x 12.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AA020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS
View related parts
2008 Toyota Solara Stabilizer Bar, Rear
Part Number: 48805-AA030
$110.09 MSRP: $154.52
You Save: $44.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AA060
- Part Name Code: 48805
- Item Weight: 5.00 Pounds
- Item Dimensions: 40.7 x 9.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48805-AA030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
2008 Toyota Solara Stabilizer Bar, Rear
Part Number: 48805-AA041
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48805
- Item Weight: 5.10 Pounds
- Item Dimensions: 42.4 x 9.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48805-AA041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Solara Submodels:
- SE, SE Sport, SLE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

2008 Toyota Solara Sway Bar Kit

Looking for affordable OEM 2008 Toyota Solara Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Solara Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Solara Sway Bar Kit Parts Q&A

Q: How to install the front Sway Bar Kit on 2008 Toyota Solara?
A: The first step to install the front sway bar kit involves attaching it directly onto the vehicle structure. Install the bush to the outer side of each bush stopper by placing its cutout section toward the rear of the sway bar kit. Install the rack & pinion power steering gear assembly followed by the pressure feed tube assembly and the steering gear outlet return tube and steering intermediate shaft assembly in order. The next step after finishing the left-hand side tie rod installation is to perform the right-hand side installation with the same procedures. Use 2 bolts to fasten the front sway bar bracket No. 1 on the left side while torquing at 27 Nm (275 kgf-cm, 20 ft-lbf) then attach the right-hand bracket with the same method. Lay the front sway bar link assembly onto the left side while securing it with 2 nuts to reach a torque setting of 74 Nm (755 kgf-cm, 55 ft-lbf). Prevent the ball joint from spinning by gripping its stud with a hexagon wrench (6 mm) prior to reinstallation of the right-hand assembly. The installation of the front wheel must be followed by torque application at 103 Nm (1,050 kgf-cm, 76 ft-lbf). Power steering fluid bleeding is necessary followed by leak inspection then front wheel alignment correction and steering wheel center adjustment.