Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 48811-AA060
Stabilizer Bar, Front

2002-2008 Toyota 48811AA060

Customer Questions & Expert Answers (12)
Toyota 48811-AA060 Stabilizer Bar, Front
  • Part Description
    Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
  • Part Name Code
    48811
  • Position
    Front
  • Manufacturer
    Toyota
Make sure this part fits
$130.77 MSRP: $185.11
You Save: $54.34 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 48811-AA060 Stabilizer Bar, Front is Ref No. 16 in the diagram below

    2005 Toyota Camry Stabilizer Bar, Front Diagram for 48811-AA060
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 48811-AA060

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48811
    Manufacturer Part Number48811-AA060
    Part DescriptionBar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
    Item Dimensions44.2 x 12.1 x 4.9 inches
    Item Weight7.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48811-AA060
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Toyota CamryBase, LE, SE, XLE4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    2004-2008 Toyota SolaraSE, SE Sport, SLE, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 48811-AA060 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48811-AA060 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you inspect the left-hand side stabilizer link assembly for the 2002 Toyota Camry? Posted by Customer
    A:
    Flip the ball joint stud back and forth 5 times before installing the nut, then use a torque wrench to turn the nut continuously at a rate of 2-4 seconds per turn and take the torque reading on the 5th turn, aiming for a turning torque of 0.05 - 1.0 Nm (0.5 - 10 kgf-cm, 0.4 - 8.7 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the procedure for tightening the nut on the left-hand side stabilizer link assembly for the 2005 Toyota Camry? Posted by Customer
    A:
    Use a torque wrench to turn the nut continuously at a rate of 2 - 4 seconds per turn and take the torque reading on the 5th turn, aiming for a turning torque of 0.05 - 1.0 Nm (0.5 - 10 kgf-cm, 0.4 - 8.7 inch lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the next step after removing the dynamic damper for the 2004 Toyota Camry? Posted by Customer
    A:
    Remove the front stabilizer bracket No. 1 LH by unscrewing the 2 bolts and do the same for the front stabilizer bracket No. 1 RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the first step to replace the rear stabilizer bar for the 2003 Toyota Camry? Posted by Customer
    A:
    First, remove the rear wheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be done with the bushes from the stabilizer for the 2006 Toyota Camry? Posted by Customer
    A:
    Take off the 2 bushes from the stabilizer and inspect the front stabilizer link assembly LH by flipping the ball joint stud back and forth 5 times before installing the nut.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do after installing the left-hand side for the 2005 Toyota Solara? Posted by Customer
    A:
    Repeat the same installation for the right-hand side.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What tool is used to separate the steering intermediate shaft assembly for the 2006 Toyota Solara? Posted by Customer
    A:
    Utilize Special Service Tool: 09628-62011.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What tool is used to separate the steering intermediate shaft assembly for the 2008 Toyota Solara? Posted by Customer
    A:
    Special Service Tool: 09628-62011.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the torque specification for Bolt A during installation for the 2004 Toyota Solara? Posted by Customer
    A:
    Tighten Bolt A to 56 Nm (571 kgf-cm, 41 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you install the rear stabilizer link assembly on the left-hand side for the 2007 Toyota Solara? Posted by Customer
    A:
    Use 2 nuts, tightening to 39 Nm (400 kgf-cm, 29 ft. lbs.), using a hexagon wrench (5 mm) if the ball joint turns with the nut.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should you do for the right-hand side stabilizer link assembly for the 2008 Toyota Solara? Posted by Customer
    A:
    Repeat the same procedure as for the left-hand side.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48811-AA060, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48811-AA060 Stabilizer Bar, Front. It is sometimes referred to as Toyota Sway Bar Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 48811AA060 Stabilizer Bar, Front. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery