×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Sienna Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shock Absorbers found
Product Specifications- Other Name: Absorber Set, Shock; Rear Shock Absorber; Suspension Kit; Strut Assembly; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Replaces: 48531-A9060
- Item Weight: 5.20 Pounds
- Item Dimensions: 26.1 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-A9200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Shock Absorber, Rear
Part Number: 48531-A9050$59.48 MSRP: $83.48You Save: $24.00 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Absorber, Shock, Rear; Suspension Kit; Strut Assembly; Shock Set; Complete Strut; Shock; Absorber Assembly, Shock, Rear Passenger Side; Absorber Assembly, Shock, Rear Driver Side
- Manufacturer Note: MARK 48531-AE020
- Position: Rear
- Item Weight: 7.00 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-A9050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Shock Absorber
Looking for affordable OEM 2008 Toyota Sienna Shock Absorber? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Shock Absorber. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sienna Shock Absorber Parts Q&A
- Q: How to disassemble the front shock absorber with coil spring on 2008 Toyota Sienna?A: Begin the front shock absorber with coil spring disassembly process by fixing the unit in a vise through two nuts along with a bolt attached to the bracket at the bottom. Special Service Tools 09727-30021 and 09727-00010 help compress the front coil spring LH yet an impact wrench must be avoided because it could damage the equipment while two tools of matching types are recommended. The process of shock absorber and coil spring disassembly requires uninstalling both the lock nut and the front suspension support sub-assembly. The following.sequence is necessary for removing the shock absorber assembly front LH: First, remove the front suspension support LH bearing and then the front coil spring seat upper LH, front coil spring insulator upper LH, front coil spring LH, front spring bumper LH and finally the front coil spring insulator lower LH.