Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Toyota Sienna Ball Joint

Control Arm Joint
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

  • 2008 Toyota Sienna Ball Joint - 43330-09560
    2008 Toyota Sienna Ball Joint - 43330-09560
    2008 Toyota Sienna Ball Joint - 43330-09560
    2008 Toyota Sienna Ball Joint Diagram - 43330-09560
    View related parts

    2008 Toyota Sienna Joint Assembly, Lower Ball, Front Passenger Side

    Part Number: 43330-09560
    $71.09 MSRP: $99.79
    You Save: $28.70 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Joint Set, Lower Ball; Suspension Ball Joint; Ball Joint
    • Position: Front Passenger Side
    • Replaces: 43330-09160
    • Part Name Code: 43330K
    • Item Weight: 2.20 Pounds
    • Item Dimensions: 5.6 x 3.6 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43330-09560
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sienna Submodels:
    • CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
  • 2008 Toyota Sienna Ball Joint - 43340-09010
    2008 Toyota Sienna Ball Joint - 43340-09010
    2008 Toyota Sienna Ball Joint Diagram - 43340-09010
    View related parts

    2008 Toyota Sienna Ball Joint, Front Driver Side

    Part Number: 43340-09010
    $65.52 MSRP: $91.97
    You Save: $26.45 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Joint Assembly, Lower Ball; Suspension Ball Joint, Front Left; Lower Ball Joint; Joint Assembly, Lower Ball, Front Driver Side; Suspension Ball Joint
    • Position: Front Driver Side
    • Replaces: 43340-09080
    • Part Name Code: 43340A
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 5.6 x 3.4 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43340-09010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sienna Submodels:
    • CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Ball Joint

Looking for affordable OEM 2008 Toyota Sienna Ball Joint? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Ball Joint. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Ball Joint Parts Q&A

  • Q: How to install the lower ball joint assembly front LH and complete the associated components on 2008 Toyota Sienna?
    A: The installation of the front LH lower ball joint assembly requires tightening the nut to 123 Nm (1,250 kgf-cm, 91 ft-lbf) before inserting a new cotter pin but only if the holes are misaligned as you may need to increase the nut torque up to 60 degrees. Begin by installing the front axle assembly LH followed by installing front suspension arm sub-assembly lower No.1 LH then anchor the tie rod assembly LH. To complete the assembly, mount forward the front disc and front disc brake caliper assembly LH. Move on to set the front axle shaft LH nut and the speed sensor front LH. Install the front wheel with 103 Nm (1,050 kgf-cm, 76 ft-lbf) torque before inspecting and aligning the front wheel and verifying the ABS speed sensor signal. Vehicles without VSC require specific ABS procedures while those with VSC need the Vehicle Stability Control System procedures.

Related 2008 Toyota Sienna Parts

Alternate Year Models

+
2007 Toyota Sienna Ball Joint 2009 Toyota Sienna Ball Joint