×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Sienna Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Coil Springs found
2008 Toyota Sienna Coil Spring, Front
Part Number: 48131-AE043$157.20 MSRP: $222.55You Save: $65.35 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Manufacturer Note: PASSENGERS CAR & R.V.-MOBILITY BASE VEICLE
- Position: Front
- Replaces: 48131-AE041, 48131-AE042
- Item Weight: 5.30 Pounds
- Item Dimensions: 15.8 x 7.1 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-AE043
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Coil Spring, Front
Part Number: 48131-AE033$149.33 MSRP: $211.39You Save: $62.06 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
- Position: Front
- Replaces: 48131-AE031, 48131-AE032
- Item Weight: 1.40 Pounds
- Item Dimensions: 15.9 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48131-AE033
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Coil Spring, Rear
Part Number: 48231-AE031$142.28 MSRP: $201.42You Save: $59.14 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Spring, Coil, Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Position: Rear
- Replaces: 48231-AE030
- Item Weight: 4.20 Pounds
- Item Dimensions: 17.0 x 10.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-AE031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Coil Spring, Rear
Part Number: 48231-AE041$156.26 MSRP: $221.21You Save: $64.95 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Spring, Coil, Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
- Manufacturer Note: PASSENGERS CAR & R.V.-MOBILITY BASE VEICLE
- Position: Rear
- Replaces: 48231-AE040
- Item Weight: 11.60 Pounds
- Item Dimensions: 16.7 x 10.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48231-AE041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Sienna Coil Springs
Looking for affordable OEM 2008 Toyota Sienna Coil Springs? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sienna Coil Springs Parts Q&A
- Q: How to remove the rear coil springs on 2008 Toyota Sienna?A: Proceeding with rear coil spring removal requires removal of the wheel from the rear. The skid control sensor connector needs disconnection for 2WD while the bolt removal allows disconnecting the bracket from the rear axle beam assembly but 4WD requires bolt and speed sensor rear LH removal. You must first take off both pieces of the exhaust pipe tail assembly then proceed to eliminate the propeller assembly along with the center bearing shaft (Prominently used in 4WD vehicles). Separate the rear drive shaft assembly LH by marking both the differential flange and rear drive shaft assembly LH position and then disconnect the 4 nuts along with the 4 washers. The 4WD installation requires separation of the rear drive shaft assembly RH through equivalent steps. For 4WD vehicles remove the rear differential carrier assembly followed by detaching parking brake cable assembly No.3 with help of the two bolts. Use Special Service Tool: 09023-00101 to detach parking brake cable assembly No.2 and rear brake tube No.2 from the flexible hose by catching the brake fluid in a container. Next remove the clip followed by the bolt to disconnect the brake tube from the rear axle beam assembly. Apply the previous steps to remove rear brake tube No.1. The next step involves removing the fuel tank filler hose cover through elimination of its 2 bolts, 3 screws, and 3 nuts and subsequent bolt detachment. Follow the previous steps to remove the rear floor No.2 crossmember brace both on the left-hand (LH) and right-hand (RH) side. When loosening the rear axle beam assembly keep the nut stationary without unfastening the bolt or nut. It is important to use a jack to support the rear axle beam assembly before removing the bolt which allows separation of the shock absorber assembly rear LH and requires repeating for the RH side. You can remove the coil spring rear LH by first wrapping a shop rug between the coil spring and the rear axle beam assembly then allowing the jack to lower down to disconnect the coil spring LH before taking out the rear coil spring insulator upper LH from the coil spring rear LH.
Related 2008 Toyota Sienna Parts
2008 Toyota Sienna Sway Bar Bushing
2008 Toyota Sienna Axle Beam Mount
2008 Toyota Sienna Bump Stop
2008 Toyota Sienna Coil Spring Insulator
2008 Toyota Sienna Control Arm Bushing
2008 Toyota Sienna Crossmember Bushing
2008 Toyota Sienna Front Cross-Member
2008 Toyota Sienna Shock Absorber
2008 Toyota Sienna Shock And Strut Mount
2008 Toyota Sienna Shock and Strut Boot
2008 Toyota Sienna Steering Knuckle
2008 Toyota Sienna Sway Bar Bracket