How to install the exhaust pipe on 2008 Toyota Sienna?

The installation of the 2GR-FE exhaust pipe for a 4WD vehicle starts by attaching the heated oxygen sensor for Bank 2 Sensor 2. Then you have to apply two new gaskets to the front exhaust pipe assembly followed by attaching it with two nuts that must be torqued to 62 Nm (632 kgf-cm, 46 ft-lbf). The center exhaust pipe assembly requires installation of two new gaskets followed by attaching its two supports with two new bolts and two new nuts that should be torqued to 43 Nm (438 kgf-cm, 32 ft-lbf) for the bolts and 62 Nm (632 kgf-cm, 46 ft-lbf) for the nuts. The No. 1 exhaust pipe support bracket requires installation on the oil pan sub-assembly with 2 new nuts torqued to 21 Nm (214 kgf-cm, 15 ft-lbf) before installing a clamp while tightening the bracket bolts to 21 Nm (214 kgf-cm, 15 ft-lbf) and finally securing the clamp with a new bolt torqued to 21 Nm (214 kgf-cm, 15 ft-lbf). Join the heated oxygen sensor for Bank 2 Sensor 2 to its proper connection point. The tail exhaust pipe assembly receives a new gasket on the center exhaust pipe assembly before adding the 4 exhaust pipe supports which should use 2 new bolts tightened to 43 Nm (438 kgf-cm, 32 ft-lbf). The installation procedure ends by connecting the heated oxygen sensor for Bank 1 Sensor 2 while connecting its cable to the negative battery terminal and verifying the exhaust gas system for leaks before performing any required replacements.

OEM 2008 Toyota Sienna Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Pipes found

View related parts
2008 Toyota Sienna Front Pipe
Part Number: 17410-0P190
$342.89 MSRP: $460.26
You Save: $117.37 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Crossover Pipe; Exhaust Y Pipe; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.40 Pounds
- Item Dimensions: 47.7 x 18.4 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Front Pipe
Part Number: 17410-0P180
$261.39 MSRP: $341.83
You Save: $80.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Front Shield; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-31660
- Part Name Code: 17410
- Item Weight: 8.10 Pounds
- Item Dimensions: 48.6 x 18.7 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0P090
$1590.02 MSRP: $2134.27
You Save: $544.25 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Y Pipe; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.10 Pounds
- Item Dimensions: 51.9 x 20.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0P090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0P080
$1466.81 MSRP: $1968.89
You Save: $502.08 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.90 Pounds
- Item Dimensions: 51.4 x 20.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0P080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0P140
$519.36 MSRP: $697.14
You Save: $177.78 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 43.6 x 12.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0P130
$423.43 MSRP: $568.37
You Save: $144.94 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.60 Pounds
- Item Dimensions: 42.8 x 12.7 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS

2008 Toyota Sienna Exhaust Pipe

Looking for affordable OEM 2008 Toyota Sienna Exhaust Pipe? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to install the exhaust pipe on 2008 Toyota Sienna?
A: The installation of the 2GR-FE exhaust pipe for a 4WD vehicle starts by attaching the heated oxygen sensor for Bank 2 Sensor 2. Then you have to apply two new gaskets to the front exhaust pipe assembly followed by attaching it with two nuts that must be torqued to 62 Nm (632 kgf-cm, 46 ft-lbf). The center exhaust pipe assembly requires installation of two new gaskets followed by attaching its two supports with two new bolts and two new nuts that should be torqued to 43 Nm (438 kgf-cm, 32 ft-lbf) for the bolts and 62 Nm (632 kgf-cm, 46 ft-lbf) for the nuts. The No. 1 exhaust pipe support bracket requires installation on the oil pan sub-assembly with 2 new nuts torqued to 21 Nm (214 kgf-cm, 15 ft-lbf) before installing a clamp while tightening the bracket bolts to 21 Nm (214 kgf-cm, 15 ft-lbf) and finally securing the clamp with a new bolt torqued to 21 Nm (214 kgf-cm, 15 ft-lbf). Join the heated oxygen sensor for Bank 2 Sensor 2 to its proper connection point. The tail exhaust pipe assembly receives a new gasket on the center exhaust pipe assembly before adding the 4 exhaust pipe supports which should use 2 new bolts tightened to 43 Nm (438 kgf-cm, 32 ft-lbf). The installation procedure ends by connecting the heated oxygen sensor for Bank 1 Sensor 2 while connecting its cable to the negative battery terminal and verifying the exhaust gas system for leaks before performing any required replacements.