How to install the Canister Purge Valve on 2008 Toyota Sienna?

You must install the Purge VSV using its bolt where the torque should reach 10 Nm (102 kgf-cm, 7 ft-lbf) and complete the installation for the 2GR-FE emission control system Canister Purge Valve. Attach both vacuum hoses and the No. 1 vacuum switching valve connector after each other. The installation process should continue by adding the V-bank cover sub-assembly. The final installation step requires cable connection to the negative battery terminal.

OEM 2008 Toyota Sienna Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
2008 Toyota Sienna Vacuum Switch, Passenger Side
Part Number: 25860-0A010
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Vacuum Switching; Vacuum Valve
- Position: Passenger Side
- Part Name Code: 25860N
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25860-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Vacuum Valve
Part Number: 90910-12204
$80.57 MSRP: $113.09
You Save: $32.52 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Valve, Duty Vacuum Switching; Exhaust Gas Recirculation (EGR) Vacuum Delay Valve; EGR Vacuum Solenoid; Valve; Valve, Vacuum Switching; Vacuum Delay Valve
- Manufacturer Note: NO.2
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.6 x 3.4 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90910-12204
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Sienna Vacuum Switch
Part Number: 25860-31070
$89.57 MSRP: $125.74
You Save: $36.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Vacuum Switching; EGR Vacuum Delay Valve; Vapor Canister Purge Solenoid; Air Injection Check Valve; Vacuum Valve; Vacuum Regulator; Vacuum Control Valve; Valve; Valve, Vacuum Switching; Vacuum Delay Valve
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.6 x 3.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25860-31070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, SE, XLE | 6 Cyl 3.5 L GAS

2008 Toyota Sienna Canister Purge Valve

Looking for affordable OEM 2008 Toyota Sienna Canister Purge Valve? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Canister Purge Valve Parts Q&A

Q: How to install the Canister Purge Valve on 2008 Toyota Sienna?
A: You must install the Purge VSV using its bolt where the torque should reach 10 Nm (102 kgf-cm, 7 ft-lbf) and complete the installation for the 2GR-FE emission control system Canister Purge Valve. Attach both vacuum hoses and the No. 1 vacuum switching valve connector after each other. The installation process should continue by adding the V-bank cover sub-assembly. The final installation step requires cable connection to the negative battery terminal.