How to remove the exhaust pipe on 2009 Toyota Sienna?

The process to remove the 2GR-FE exhaust pipe from a 4WD requires beginning with disconnecting the negative battery cable. The next step requires removal of the heated oxygen sensor located at Bank 1 Sensor 2 position. First disconnect the tail exhaust pipe assembly by removing its two bolts followed by deconnecting the four exhaust pipe supports before you can remove the gasket from the center exhaust pipe assembly. The center exhaust pipe requires 2 bolts and 2 nuts removal along with discarding the 2 exhaust pipe supports to remove its gaskets from the front and center assemblies. Disassembly of the front exhaust pipe begins with Bank 2 Sensor 2 heated oxygen sensor connector removal followed by removal of the 4 nuts which unfastens the front exhaust pipe assembly and allows its gasket to be taken away. The final step requires removing the heated oxygen sensor for Bank 2 Sensor 2 after you disconnect the bolt which holds the No. 1 exhaust pipe support bracket.

OEM 2009 Toyota Sienna Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Pipes found

View related parts
2009 Toyota Sienna Front Pipe
Part Number: 17410-0P190
$342.89 MSRP: $460.26
You Save: $117.37 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Crossover Pipe; Exhaust Y Pipe; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.40 Pounds
- Item Dimensions: 47.7 x 18.4 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Front Pipe
Part Number: 17410-0P180
$261.39 MSRP: $341.83
You Save: $80.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Front Shield; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-31660
- Part Name Code: 17410
- Item Weight: 8.10 Pounds
- Item Dimensions: 48.6 x 18.7 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0P090
$1590.02 MSRP: $2134.27
You Save: $544.25 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Y Pipe; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.10 Pounds
- Item Dimensions: 51.9 x 20.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0P090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Intermediate Pipe, Center
Part Number: 17420-0P080
$1466.81 MSRP: $1968.89
You Save: $502.08 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.90 Pounds
- Item Dimensions: 51.4 x 20.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0P080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0P140
$519.36 MSRP: $697.14
You Save: $177.78 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.30 Pounds
- Item Dimensions: 43.6 x 12.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Sienna Muffler & Tail Pipe
Part Number: 17430-0P130
$423.43 MSRP: $568.37
You Save: $144.94 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.60 Pounds
- Item Dimensions: 42.8 x 12.7 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sienna Submodels:
- CE, LE, Limited, XLE | 6 Cyl 3.5 L GAS

2009 Toyota Sienna Exhaust Pipe

Looking for affordable OEM 2009 Toyota Sienna Exhaust Pipe? Explore our comprehensive catalogue of genuine 2009 Toyota Sienna Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sienna Parts Questions & Experts Answers

Q: How to remove the exhaust pipe on 2009 Toyota Sienna?
A: The process to remove the 2GR-FE exhaust pipe from a 4WD requires beginning with disconnecting the negative battery cable. The next step requires removal of the heated oxygen sensor located at Bank 1 Sensor 2 position. First disconnect the tail exhaust pipe assembly by removing its two bolts followed by deconnecting the four exhaust pipe supports before you can remove the gasket from the center exhaust pipe assembly. The center exhaust pipe requires 2 bolts and 2 nuts removal along with discarding the 2 exhaust pipe supports to remove its gaskets from the front and center assemblies. Disassembly of the front exhaust pipe begins with Bank 2 Sensor 2 heated oxygen sensor connector removal followed by removal of the 4 nuts which unfastens the front exhaust pipe assembly and allows its gasket to be taken away. The final step requires removing the heated oxygen sensor for Bank 2 Sensor 2 after you disconnect the bolt which holds the No. 1 exhaust pipe support bracket.