How to remove the Coolant Temperature Sensor/Switch on 2008 Toyota Sienna?

The first step to remove the Coolant Temperature Sensor/Switch for the 2GR-FE engine control system requires draining the engine coolant. Start by removing the V-bank cover sub-assembly and subsequently disassemble the No. 2 air cleaner inlet until reaching the No. 1 air cleaner inlet. The procedure should continue with the removal of air cleaner cap sub-assembly followed by air cleaner case sub-assembly. Finish the procedure by disconnecting the engine coolant temperature sensor connector before taking out the engine coolant temperature sensor.

OEM 2008 Toyota Sienna Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2008 Toyota Sienna Coolant Temperature Sensor
Part Number: 89422-33030
$63.39 MSRP: $88.98
You Save: $25.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Water Temperature; Engine Coolant Temp; Cooling Fan Temp Switch; Temperature Sensor; Sensor, Water Temperature (For E.F.I.)
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89422-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sienna Submodels:
- Base, CE, L, LE, Limited, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Toyota Sienna Coolant Temperature Sensor

Looking for affordable OEM 2008 Toyota Sienna Coolant Temperature Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sienna Coolant Temperature Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sienna Parts Questions & Experts Answers

Q: How to remove the Coolant Temperature Sensor/Switch on 2008 Toyota Sienna?
A: The first step to remove the Coolant Temperature Sensor/Switch for the 2GR-FE engine control system requires draining the engine coolant. Start by removing the V-bank cover sub-assembly and subsequently disassemble the No. 2 air cleaner inlet until reaching the No. 1 air cleaner inlet. The procedure should continue with the removal of air cleaner cap sub-assembly followed by air cleaner case sub-assembly. Finish the procedure by disconnecting the engine coolant temperature sensor connector before taking out the engine coolant temperature sensor.

Related 2008 Toyota Sienna Parts

Alternate Year Models

2007 Toyota Sienna Coolant Temperature Sensor 2009 Toyota Sienna Coolant Temperature Sensor