Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
Manufacturer Note: BLACK,TRIM2#
Position: Passenger Side
Replaces: 73210-0C081-C4
Part Name Code: 73210
Item Weight: 2.30 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-0C081-C1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
Manufacturer Note: GRAY,TRIM1#
Position: Passenger Side
Replaces: 73210-0C081-B3
Part Name Code: 73210
Item Weight: 4.10 Pounds
Item Dimensions: 10.2 x 7.2 x 6.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-0C081-B2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
Manufacturer Note: SAND BEIGE,TRIM4#
Position: Passenger Side
Replaces: 73210-0C081-A0
Part Name Code: 73210
Item Weight: 2.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73210-0C081-E1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
Position: Driver Side
Replaces: 73220-0C081-B3
Part Name Code: 73220
Item Weight: 4.10 Pounds
Item Dimensions: 10.5 x 7.3 x 6.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73220-0C081-B2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
Position: Driver Side
Replaces: 73220-0C081-C4
Part Name Code: 73220
Item Weight: 2.30 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73220-0C081-C1
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 54 Results
2008 Toyota Sequoia Seat Belt
Looking for affordable OEM 2008 Toyota Sequoia Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sequoia Seat Belt Parts Q&A
Q: How is the Seat Belt for the Rear Center Seat Outer Assembly Installed on 2008 Toyota Sequoia?
A: The installation of the rear center seat outer belt assembly requires center seatback frame claws to be aligned with the center seat outer belt retractor positioning holes before securing it with 4 nuts while Nut A receives a torque of 42 Nm (428 kgf-cm, 31 ft-lbf) and Nut B requires 5.5 Nm (56 kgf-cm, 49 in-lbf). The cable should be tied into position with the cable tie. Proceed with installation of the seatback cover with pad followed by the armrest assembly and the rear seat shoulder belt hole covers No. 3 through No. 1 together with the rear seat headrest support, rear seat lock control lever sub-assembly LH, rear seatback lock striker cover and ending with rear seatback board sub-assembly. After installing the rear center seat headrest assembly the technician should complete the procedure by installing the center seat cushion assembly followed by the rear seat cushion hinge cover upper RH and the rear seat cushion hinge cover upper LH then the rear center seat assembly.