How to reassemble the Drive Shaft assembly on 2008 Toyota Sequoia?

Start the reassembly of 2WD propeller shaft components by fitting in the rear universal joint spider of the propeller shaft. Apply MP grease to fresh universal joint spider elements together with its bearings but avoid excessive lubrication. Measure dimension A through the snap ring grooves before placing the universal joint spider bearing into the spider. Clamp these components in a vise to measure accuracy of dimension B. Install hole snap rings of proper thickness to achieve an equal length between dimensions A and B by using fresh snap rings of identical edge dimensions. Install the temporary universal joint spider along with two bearings into the universal joint sleeve yoke before using Special Service Tool: 09950-40011, 09951-04020 to press the bearing into place until the groove appears while testing for spider movement smoothness. After installing a hole snap ring into the groove of the universal joint sleeve yoke using needle-nose pliers the process must be repeated across the opposite side. Receivers need to slide the universal joint spider and two bearings into the universal joint yoke of the propeller shaft before employing Special Service Tools: 09950-40011, 09951-04020 to push the bearing into the yoke until the groove becomes visible to confirm spider movement. Install a hole snap ring into the universal joint yoke groove while using needle-nose pliers due to similar installation steps on the other side. The universal joint spider bearing receives examination during the testing and inspection operations.

OEM 2008 Toyota Sequoia Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
2008 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C164
$669.87 MSRP: $981.69
You Save: $311.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C163, 37110-0C153, 37110-0C160
- Part Name Code: 37110
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C164
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C144
$574.87 MSRP: $842.47
You Save: $267.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C141, 37110-0C140
- Part Name Code: 37110
- Item Weight: 14.70 Pounds
- Item Dimensions: 34.7 x 7.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C144
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C112
$382.14 MSRP: $560.04
You Save: $177.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Front; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-0C111, 37140-0C110
- Part Name Code: 37140
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-0C112
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Drive Shaft
Part Number: 37110-0C130
$660.32 MSRP: $967.70
You Save: $307.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Part Name Code: 37110
- Item Weight: 14.60 Pounds
- Item Dimensions: 34.7 x 6.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2008 Toyota Sequoia Drive Shaft
Part Number: 37110-0C150
$620.85 MSRP: $909.85
You Save: $289.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Part Name Code: 37110
- Item Weight: 15.70 Pounds
- Item Dimensions: 34.7 x 6.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2008 Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C100
$470.92 MSRP: $690.14
You Save: $219.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Part Name Code: 37140
- Item Weight: 14.70 Pounds
- Item Dimensions: 34.4 x 6.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2008 Toyota Sequoia Drive Shaft

Looking for affordable OEM 2008 Toyota Sequoia Drive Shaft? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Drive Shaft Parts Q&A

Q: How to reassemble the Drive Shaft assembly on 2008 Toyota Sequoia?
A: Start the reassembly of 2WD propeller shaft components by fitting in the rear universal joint spider of the propeller shaft. Apply MP grease to fresh universal joint spider elements together with its bearings but avoid excessive lubrication. Measure dimension A through the snap ring grooves before placing the universal joint spider bearing into the spider. Clamp these components in a vise to measure accuracy of dimension B. Install hole snap rings of proper thickness to achieve an equal length between dimensions A and B by using fresh snap rings of identical edge dimensions. Install the temporary universal joint spider along with two bearings into the universal joint sleeve yoke before using Special Service Tool: 09950-40011, 09951-04020 to press the bearing into place until the groove appears while testing for spider movement smoothness. After installing a hole snap ring into the groove of the universal joint sleeve yoke using needle-nose pliers the process must be repeated across the opposite side. Receivers need to slide the universal joint spider and two bearings into the universal joint yoke of the propeller shaft before employing Special Service Tools: 09950-40011, 09951-04020 to push the bearing into the yoke until the groove becomes visible to confirm spider movement. Install a hole snap ring into the universal joint yoke groove while using needle-nose pliers due to similar installation steps on the other side. The universal joint spider bearing receives examination during the testing and inspection operations.