How to install the Drive Shaft assembly on 2009 Toyota Sequoia?

Start the 2UZ-FE propeller shaft assembly installation by taking out Special Service Tool: 09325-40010 from the transmission followed by inserting the propeller shaft assembly into the transmission while aligning matchmarks from the propeller shaft flange to the differential flange. Insert the propeller shaft assembly to the differential side then secure it by torquing 4 nuts to 70 Nm (714 kgf-cm, 52 ft-lbf). Start the 3UR-FE installation by removing Special Service Tool 09325-60010 from the transmission and then inserting the propeller shaft assembly while aligning the matchmarks between the propeller shaft flange and differential flange. The propeller shaft assembly must be installed to the differential side where 4 nuts perform retention after torque application reaches 70 Nm (714 kgf-cm, 52 ft-lbf). Check for automatic transmission fluid leakage as the final step.

OEM 2009 Toyota Sequoia Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
2009 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C164
$640.92 MSRP: $939.28
You Save: $298.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C163, 37110-0C153, 37110-0C160
- Part Name Code: 37110
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C164
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C144
$550.01 MSRP: $806.05
You Save: $256.04 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C141, 37110-0C140
- Part Name Code: 37110
- Item Weight: 14.70 Pounds
- Item Dimensions: 34.7 x 7.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C144
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C112
$365.69 MSRP: $535.92
You Save: $170.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Front; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-0C111, 37140-0C110
- Part Name Code: 37140
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-0C112
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Drive Shaft
Part Number: 37110-0C130
$660.32 MSRP: $967.70
You Save: $307.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Part Name Code: 37110
- Item Weight: 14.60 Pounds
- Item Dimensions: 34.7 x 6.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2009 Toyota Sequoia Drive Shaft
Part Number: 37110-0C150
$620.85 MSRP: $909.85
You Save: $289.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Part Name Code: 37110
- Item Weight: 15.70 Pounds
- Item Dimensions: 34.7 x 6.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37110-0C150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2009 Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C100
$470.92 MSRP: $690.14
You Save: $219.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Part Name Code: 37140
- Item Weight: 14.70 Pounds
- Item Dimensions: 34.4 x 6.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 37140-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2009 Toyota Sequoia Drive Shaft

Looking for affordable OEM 2009 Toyota Sequoia Drive Shaft? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Drive Shaft. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the Drive Shaft assembly on 2009 Toyota Sequoia?
A: Start the 2UZ-FE propeller shaft assembly installation by taking out Special Service Tool: 09325-40010 from the transmission followed by inserting the propeller shaft assembly into the transmission while aligning matchmarks from the propeller shaft flange to the differential flange. Insert the propeller shaft assembly to the differential side then secure it by torquing 4 nuts to 70 Nm (714 kgf-cm, 52 ft-lbf). Start the 3UR-FE installation by removing Special Service Tool 09325-60010 from the transmission and then inserting the propeller shaft assembly while aligning the matchmarks between the propeller shaft flange and differential flange. The propeller shaft assembly must be installed to the differential side where 4 nuts perform retention after torque application reaches 70 Nm (714 kgf-cm, 52 ft-lbf). Check for automatic transmission fluid leakage as the final step.