How to install the Drive Shaft assembly on Toyota Sequoia?

The installation of the propeller shaft assembly for 2WD requires the removal of Special Service Tool: 09325-40010 from the transmission. The transmission procedures require insertion of the yoke where we must align mark symbols appearing on the flanges. The installation of flanges requires washers and nuts before torquing the 4 nuts to 88 Nm (897 kgf-cm, 65 ft. lbs.).

How to remove the front Drive Shaft assembly on Toyota Sequoia?

Begin the front driveshaft assembly removal by dismounting the propeller shaft insulation through two bolt removal and insulation detachment from the heat shield bracket. A matching mark gets applied to the differential and propeller shaft flanges together with the transmission shaft and propeller shaft flanges. The front driveshaft assembly can be removed by first taking out its 8 nuts and 8 washers.

OEM Toyota Sequoia Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Drive Shafts found

View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-34120
$557.84 MSRP: $817.52
You Save: $259.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C040
$548.65 MSRP: $804.04
You Save: $255.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C040
$307.43 MSRP: $438.94
You Save: $131.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft
Part Number: 37110-0C150
$620.85 MSRP: $909.85
You Save: $289.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft
Part Number: 37110-0C130
$660.32 MSRP: $967.70
You Save: $307.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft Assembly, Rear
Part Number: 37110-0C060
$778.25 MSRP: $1140.53
You Save: $362.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5 | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C050
$766.91 MSRP: $1123.91
You Save: $357.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft Assembly; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C170
$365.46 MSRP: $535.58
You Save: $170.12 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Shaft Assembly, Propeller, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C112
$382.14 MSRP: $560.04
You Save: $177.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Front; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-0C111, 37140-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C100
$470.92 MSRP: $690.14
You Save: $219.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft
Part Number: 37110-0C193
$728.85 MSRP: $1068.14
You Save: $339.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Replaces: 37110-0C190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2012 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.6 L GAS
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C164
$669.87 MSRP: $981.69
You Save: $311.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C163, 37110-0C153, 37110-0C160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C144
$574.87 MSRP: $842.47
You Save: $267.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 37110-0C141, 37110-0C140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-0C030
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Front
Part Number: 37140-0C051
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Front
- Position: Front
- Replaces: 37140-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Drive Shaft, Rear
Part Number: 37110-34080
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia Drive Shaft

Choose genuine Drive Shaft that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Drive Shaft for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Drive Shaft plays the vital role of power transmission and torque from any of the engine or transmission or other components to the drive wheels for proper function of the vehicle in case of Toyota Sequoia. This part must be used to take torsion and shear stress loads and it must also be light - weighted to cut down on inertia loads. In the form of a Drive Shaft, the alignment may change between connected components where splined or universal joints are normally used. For a long time now the Sequoia has incorporated in its construction one and two part driveshafts. The car features a two-piece driveshaft which has been mainly praised for its crash safety. With the four-wheel and all-wheel systems being applied, there are several driveshafts used, and the transfer cases help to divide the power between the front and rear axles. The flexibility in the construction of driveshaft ensures that it delivers a good performance in several driving situations.

Toyota Sequoia Drive Shaft Parts and Q&A

Drive Shaft, Rear
37110-34120
Q: How to install the Drive Shaft assembly on Toyota Sequoia?
A:
The installation of the propeller shaft assembly for 2WD requires the removal of Special Service Tool: 09325-40010 from the transmission. The transmission procedures require insertion of the yoke where we must align mark symbols appearing on the flanges. The installation of flanges requires washers and nuts before torquing the 4 nuts to 88 Nm (897 kgf-cm, 65 ft. lbs.).
Drive Shaft, Front
37140-0C112
Q: How to remove the front Drive Shaft assembly on Toyota Sequoia?
A:
Begin the front driveshaft assembly removal by dismounting the propeller shaft insulation through two bolt removal and insulation detachment from the heat shield bracket. A matching mark gets applied to the Differential and propeller shaft flanges together with the transmission shaft and propeller shaft flanges. The front driveshaft assembly can be removed by first taking out its 8 nuts and 8 washers.

Related Toyota Sequoia Parts

Browse Toyota Sequoia Drive Shaft by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001