Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2008 Toyota Sequoia Differential
Looking for affordable OEM 2008 Toyota Sequoia Differential? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Differential. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sequoia Differential Parts Q&A
Q: How to install the rear differential carrier assembly on 2008 Toyota Sequoia?
A: The first installation step for the rear differential carrier assembly includes raising the component into position with a jack and then securely fitting the 6 bolts temporarily. The bolt tightening process starts by first using a torque wrench on bolts A to D to reach 120 Nm (1224 kgf-cm, 89 ft-lbf), followed by using a hexagon wrench on bolts E to F with a torque of 200 Nm (2039 kgf-cm, 148 ft-lbf). Use the exact installation steps for the rear drive shaft assembly RH to install the left-hand side rear drive shaft assembly. When working with 4WD models install all parts from the propeller shaft assembly yet 2WD models require installation matching the propeller shaft assembly steps. Both differential oil additions and oil leak inspections should take place after the final installation.