Other Name: Spring, Coil, Front Right-Hand; Coil Spring, Front Right; Coil Springs; Spring; Spring, Front Coil, Passenger Side
Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
Position: Passenger Side
Part Name Code: 48131
Item Weight: 6.90 Pounds
Item Dimensions: 15.9 x 7.1 x 5.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-0C550
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2008 Toyota Sequoia Coil Springs
Looking for affordable OEM 2008 Toyota Sequoia Coil Springs? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sequoia Coil Springs Parts Q&A
Q: How to install the rear coil springs on the left-hand side on 2008 Toyota Sequoia?
A: Install the rear coil spring on the left-hand side by first compressing it with Special Service Tool: 09727-30021. After fitting the coil spring to the No. 2 lower arm jack up the No. 2 lower arm so that the coil spring positioning mark matches the triangle on the vehicle body frame. Remove the Special Service Tool from the coil spring after checking for visibility of the ID mark through the drain hole of the No. 2 lower arm. The next procedure requires tightening the rear upper control arm assembly on the left-hand side before installing the rear shock absorber assembly on the left-hand side. The inspection of rear wheel alignment should be performed as the final step.