Other Name: Spring, Coil, Rear; Coil Spring, Rear; Spring
Position: Rear
Replaces: 48231-0C020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
Other Name: Spring, Coil, Front Right-Hand; Coil Spring, Front Right; Coil Springs; Spring; Spring, Front Coil, Passenger Side
Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 51 Results
Toyota Sequoia Coil Springs
If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia Coil Springs at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to install the rear coil springs on the left-hand side on Toyota Sequoia?
A: Installation of left rear coil spring requires using tool 09727-30021 to compress it and fit into the No. 2 lower arm and position the mark until it aligns to the frame of the vehicle.Make sure the ID mark is visible then take away the tool.Install Shock Absorber, tighten upper Control Arm and wheel alignment.
Q: How to service and repair the front shock absorber and coil springs on Toyota Sequoia?
A: The front wheel and shock assembly should be removed to repair the coil spring shock absorber at the front. Spring compressor is used to disassemble and examine it with regard to problems. Check Replacement It is requisite to replace components and to ensure good torque during replacement. Lastly, get rid of the shock absorber by stretching out the rod and drilling an opening to release gas.