Other Name: Spring, Coil, Front Right-Hand; Coil Spring, Front Right; Coil Springs; Spring; Spring, Front Coil, Passenger Side
Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
Position: Passenger Side
Part Name Code: 48131
Item Weight: 6.90 Pounds
Item Dimensions: 15.9 x 7.1 x 5.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-0C550
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Sequoia Coil Springs
Looking for affordable OEM 2009 Toyota Sequoia Coil Springs? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sequoia Coil Springs Parts Q&A
Q: How to install the rear coil springs on the left-hand side on 2009 Toyota Sequoia?
A: Start the installation process of the left-hand side rear coil spring by using Special Service Tool: 09727-30021 to compress the coil spring. Install the coil spring onto No. 2 lower arm before jacking up the No. 2 lower arm until the coil spring positioning mark matches the triangular shape on the vehicle body frame. Certain visibility of the ID mark on the coil spring through No. 2 lower arm's drain hole must occur before taking off the Special Service Tool from the spring. Begin by tightening the left rear upper control arm assembly then proceed with installing the shock absorber unit on the same side. Check and correct the wheel alignment settings of the rear wheels as the last step.