How to install the side Air Bag sensor assembly on the LH side on 2008 Toyota Prius?

The installation procedure for LH side Air Bag sensor assembly starts by reading the SRS Air Bag system notices then proceeding with the steps. Apply the exact methods to the RH side installation as well. Two nuts should be installed on the sensor while applying 9.0 Nm (92 kgf-cm, 80 in-lbf) torque. A new Air Bag sensor must replace the existing one when any drop damage or cracks or dents or defects appear on the case or bracket or connector. The SRS wiring needs proper installation so it remains free from contact with any other components. During post-installation check for any loose installation components of the sensor before connecting its connector. Install the front seat outer belt assembly LH followed by center pillar garnish lower LH and after that place the rear door opening trim Weather Strip LH together with front door opening trim Weather Strip LH and finally secure the rear door scuff plate LH and front door scuff plate LH. Before continuing to initialize the system install the cable onto the negative terminal of the battery; particular systems demand this step when connecting and disconnecting the cable. You should examine the SRS warning light to validate system performance.

OEM 2008 Toyota Prius Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2008 Toyota Prius Front Impact Sensor, Driver Side
Part Number: 89174-49125
$98.70 MSRP: $119.00
You Save: $20.30 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Left; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Driver Side
- Position: Front Driver Side
- Part Name Code: 89174A
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89174-49125
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Front Impact Sensor, Passenger Side
Part Number: 89173-49315
$98.70 MSRP: $119.00
You Save: $20.30 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side
- Position: Front Passenger Side
- Part Name Code: 89173A
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-49315
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Side Impact Sensor, Front
Part Number: 89860-47040
$191.58 MSRP: $234.95
You Save: $43.37 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-47040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Side Impact Sensor, Rear Driver Side
Part Number: 89834-47020
$122.66 MSRP: $173.63
You Save: $50.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Left; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Driver Side
- Position: Rear Driver Side
- Part Name Code: 89834
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89834-47020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Side Impact Sensor, Rear Passenger Side
Part Number: 89833-47030
$120.66 MSRP: $170.81
You Save: $50.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Rear; Air Bag Impact Sensor, Rear Right; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side
- Position: Rear Passenger Side
- Part Name Code: 89833
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89833-47030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Air Bag Sensor

Looking for affordable OEM 2008 Toyota Prius Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to install the side Air Bag sensor assembly on the LH side on 2008 Toyota Prius?
A: The installation procedure for LH side Air Bag sensor assembly starts by reading the SRS Air Bag system notices then proceeding with the steps. Apply the exact methods to the RH side installation as well. Two nuts should be installed on the sensor while applying 9.0 Nm (92 kgf-cm, 80 in-lbf) torque. A new Air Bag sensor must replace the existing one when any drop damage or cracks or dents or defects appear on the case or bracket or connector. The SRS wiring needs proper installation so it remains free from contact with any other components. During post-installation check for any loose installation components of the sensor before connecting its connector. Install the front seat outer belt assembly LH followed by center pillar garnish lower LH and after that place the rear door opening trim Weather Strip LH together with front door opening trim Weather Strip LH and finally secure the rear door scuff plate LH and front door scuff plate LH. Before continuing to initialize the system install the cable onto the negative terminal of the battery; particular systems demand this step when connecting and disconnecting the cable. You should examine the SRS warning light to validate system performance.