OEM 2008 Toyota Land Cruiser Yaw Sensor

2008 Toyota Land Cruiser Parts Questions & Experts Answers

• Q: How to remove the Yaw Sensor on 2008 Toyota Land Cruiser?

  A: The procedure for removing the Yaw Rate Sensor begins with disconnecting the cable from the negative battery terminal before disabling the SRS system for at least 90 seconds. Recovering refrigerant belonging to the refrigeration system forms part of the next procedure for vehicles equipped with a Cool Box. Proceed by removing the front seat assembly LH, followed by the No. 2 instrument panel finish panel cushion, the lower instrument panel pad sub-assembly LH, the No. 1 instrument panel finish panel cushion, the lower instrument panel pad sub-assembly RH, the shift lever knob sub-assembly, the lower center instrument cluster finish panel sub-assembly, the rear upper console panel sub-assembly, the console cup holder box sub-assembly, the upper console panel sub-assembly, the No. 1 cooler cover if equipped with a Cool Box, the rear console end panel sub-assembly, and the rear console box sub-assembly if not equipped with a Cool Box. The removal process begins with disassembly of the Cool Box assembly when it is present. The procedure ends with disassembly of the Yaw Rate Sensor that includes removing both retaining bolts and removing its sensor connector while unfastening the bracket clamp.