How to remove the rear speed sensors on 2008 Toyota Land Cruiser?

One must begin by disconnecting the negative battery terminal cable followed by a 90-second wait period until the SRS system disables. The installation of a new skid control sensor wire starts by disconnecting the LH speed sensor connector and letting go of 2 clamps before removing the bolt and sensor clamp and parting the 5 and 3 clamps until the speed sensor RH connector breaks free and the bolt is loose to detach the connector and remove the wire. Take off the nut from rear speed sensor LH along with the sensor but avoid rotations while pulling it outward. The procedure must be performed twice on the rear speed sensor RH as you need to eliminate its nut and sensor without turning it.

OEM 2008 Toyota Land Cruiser Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2008 Toyota Land Cruiser Sensor, Speed, Front Driver Side
Part Number: 89543-04020
$224.83 MSRP: $321.01
You Save: $96.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; Sensor, Speed, Rear Driver Side; ABS Wheel Speed Sensor; ABS Sensor
- Position: Front Driver Side
- Replaces: 89543-60050
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.8 x 12.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser ABS Sensor, Front Passenger Side
Part Number: 89542-04020
$224.83 MSRP: $321.01
You Save: $96.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right, Rear Right; Speed Sensor; Front/Rear Passenger Side ABS Wheel Speed Sensor.
- Position: Front Passenger Side
- Replaces: 89542-60050
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.2 x 7.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser Vehicle Speed Sensor
Part Number: 89413-0C021
Product Specifications
- Other Name: Sensor, Transmission; Sensor, Transmission Revolution (SP2); Sensor, Transmission Revolution(NT)
- Replaces: 89413-0C020
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89413-0C021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 5.7 L GAS

2008 Toyota Land Cruiser Speed Sensor

Looking for affordable OEM 2008 Toyota Land Cruiser Speed Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Land Cruiser Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Land Cruiser Speed Sensor Parts Q&A

Q: How to remove the rear speed sensors on 2008 Toyota Land Cruiser?
A: One must begin by disconnecting the negative battery terminal cable followed by a 90-second wait period until the SRS system disables. The installation of a new skid control sensor wire starts by disconnecting the LH speed sensor connector and letting go of 2 clamps before removing the bolt and sensor clamp and parting the 5 and 3 clamps until the speed sensor RH connector breaks free and the bolt is loose to detach the connector and remove the wire. Take off the nut from rear speed sensor LH along with the sensor but avoid rotations while pulling it outward. The procedure must be performed twice on the rear speed sensor RH as you need to eliminate its nut and sensor without turning it.