How to install the rear upper control arm assembly on the LH side on 2008 Toyota Land Cruiser?

The installation process for rear upper control arm assembly on the LH side requires using 2 washers along with the control arm while installing 2 bolts and 2 nuts for temporary placement. Before taking the car down, install and torque the rear wheels up to 131 Nm (1336 kgf-cm, 97 ft-lbf). Afterward, lower the vehicle and apply force several times for suspension stabilization before removing the rear wheels. Tighten the 2 assembly nuts on the rear upper control arm with 150 Nm (1530 kgf-cm, 111 ft-lbf) torque. The installation requires torqueing the rear upper control arm assembly nuts to 150 Nm (1530 kgf-cm, 111 ft-lbf). The stabilizer control tube insulator should be installed using 2 bolts which require 18 Nm (184 kgf-cm, 13 ft-lbf) torque while the speed sensor wire harness needs to be connected with 13 Nm (127 kgf-cm, 9 ft-lbf) torque. Attach the rear wheel and torque it to 131 Nm (1336 kgf-cm, 97 ft-lbf). First measure the vehicle height before shutting the shutter valve of the accumulator housing and afterward installing the stabilizer control valve protector.

OEM 2008 Toyota Land Cruiser Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arms found

View related parts
2008 Toyota Land Cruiser Upper Control Arm, Rear Driver Side
Part Number: 48710-60150
$138.43 MSRP: $195.97
You Save: $57.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Upper Control; Suspension Control Arm, Rear Left Upper; Arm Assembly, Upper Control, Rear Driver Side; Control Arm
- Position: Rear Driver Side
- Part Name Code: 48790
- Item Weight: 5.60 Pounds
- Item Dimensions: 20.1 x 7.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48710-60150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser Arm Sub-Assembly, Front Suspension, Lower Driver Side
Part Number: 48069-60030
$285.70 MSRP: $407.92
You Save: $122.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 29.10 Pounds
- Item Dimensions: 2.5 x 1.8 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-60030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser Arm Sub-Assembly, Front Suspension, Lower Passenger Side
Part Number: 48068-60030
$288.89 MSRP: $412.46
You Save: $123.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 27.50 Pounds
- Item Dimensions: 2.4 x 1.8 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-60030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser Upper Control Arm, Driver Side
Part Number: 48630-60030
$292.89 MSRP: $418.19
You Save: $125.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Left Upper; Control Arm Assembly; Arm Assembly, Front Suspension, Upper Driver Side; Control Arm
- Position: Upper Driver Side
- Part Name Code: 48630
- Item Weight: 7.30 Pounds
- Item Dimensions: 13.1 x 4.0 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48630-60030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Land Cruiser Upper Control Arm, Passenger Side
Part Number: 48610-60060
$292.89 MSRP: $418.19
You Save: $125.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Suspension; Suspension Control Arm, Front Right Upper; Control Arm Assembly; Arm Assembly, Front Suspension Upper, Passenger Side; Control Arm
- Position: Passenger Side
- Part Name Code: 48610
- Item Weight: 2.60 Pounds
- Item Dimensions: 14.0 x 3.8 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48610-60060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS

2008 Toyota Land Cruiser Control Arm

Looking for affordable OEM 2008 Toyota Land Cruiser Control Arm? Explore our comprehensive catalogue of genuine 2008 Toyota Land Cruiser Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to install the rear upper control arm assembly on the LH side on 2008 Toyota Land Cruiser?
A: The installation process for rear upper control arm assembly on the LH side requires using 2 washers along with the control arm while installing 2 bolts and 2 nuts for temporary placement. Before taking the car down, install and torque the rear wheels up to 131 Nm (1336 kgf-cm, 97 ft-lbf). Afterward, lower the vehicle and apply force several times for suspension stabilization before removing the rear wheels. Tighten the 2 assembly nuts on the rear upper control arm with 150 Nm (1530 kgf-cm, 111 ft-lbf) torque. The installation requires torqueing the rear upper control arm assembly nuts to 150 Nm (1530 kgf-cm, 111 ft-lbf). The stabilizer control tube insulator should be installed using 2 bolts which require 18 Nm (184 kgf-cm, 13 ft-lbf) torque while the speed sensor wire harness needs to be connected with 13 Nm (127 kgf-cm, 9 ft-lbf) torque. Attach the rear wheel and torque it to 131 Nm (1336 kgf-cm, 97 ft-lbf). First measure the vehicle height before shutting the shutter valve of the accumulator housing and afterward installing the stabilizer control valve protector.