How to install the front Crankshaft Seal on 2008 Toyota Highlander?

You need to lubricate the lip of a fresh oil seal with MP grease before installing it onto the 2GR-FE engine front crankshaft. Install the oil seal through Special Service Tool: 09223-22010 09506-35010 and 09213-70020. Apply gentle blows with a hammer to push the seal until it reaches timing chain cover edge. Keep the seal lip clean from contamination while avoiding any angled strikes. Slide the pulley onto position after aligning its key with the corresponding groove in the crankshaft pulley. Apply Special Service Tools 09213-70011 and 09213-70020 to install the pulley bolt while tightening it to 250 Nm (2550 kgf-cm, 184 ft-lbf) using Special Service Tool 09330-00021. The installation process requires the V-ribbed belt followed by the front fender apron seal RH and then the front fender liner RH until the front fender moulding sub-assembly RH is fitted. Install the under cover for the No. 1 engine before installing the engine under cover assembly. Attach the front right wheel with a final torque figure of 103 Nm (1050 kgf-cm, 76 ft-lbf).

OEM 2008 Toyota Highlander Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2008 Toyota Highlander Rear Main Seal
Part Number: 90311-A0027
$43.98 MSRP: $61.21
You Save: $17.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Oil Seal; Rear Seal; Front Seal; Seal, Engine Rear Oil; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 90080-31053, 90311-92003, 90311-92010, 90311-92004, 90311-92006, 90311-92009
- Part Name Code: 11381A
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.1 x 5.2 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0027
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, L, LE, LE Plus, Limited, Limited Platinum, Platinum, Plus, SE, Sport, XLE, XSE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Oil Seal, Front
Part Number: 90311-A0005
$19.00 MSRP: $26.45
You Save: $7.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Multi-Purpose Seal; Timing Cover Seal; Crankshaft Seal; Front Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 90311-42019, 90311-42007, 90311-42037, 90311-42036
- Part Name Code: 11301C
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.3 x 4.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, LE, LE Plus, Limited, Plus, SE, Sport, XLE | 6 Cyl 3.5 L GAS

2008 Toyota Highlander Crankshaft Seal

Looking for affordable OEM 2008 Toyota Highlander Crankshaft Seal? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Crankshaft Seal. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the front Crankshaft Seal on 2008 Toyota Highlander?
A: You need to lubricate the lip of a fresh oil seal with MP grease before installing it onto the 2GR-FE engine front crankshaft. Install the oil seal through Special Service Tool: 09223-22010 09506-35010 and 09213-70020. Apply gentle blows with a hammer to push the seal until it reaches timing chain cover edge. Keep the seal lip clean from contamination while avoiding any angled strikes. Slide the pulley onto position after aligning its key with the corresponding groove in the crankshaft pulley. Apply Special Service Tools 09213-70011 and 09213-70020 to install the pulley bolt while tightening it to 250 Nm (2550 kgf-cm, 184 ft-lbf) using Special Service Tool 09330-00021. The installation process requires the V-ribbed belt followed by the front fender apron seal RH and then the front fender liner RH until the front fender moulding sub-assembly RH is fitted. Install the under cover for the No. 1 engine before installing the engine under cover assembly. Attach the front right wheel with a final torque figure of 103 Nm (1050 kgf-cm, 76 ft-lbf).