Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 90311-A0027
Rear Main Seal

1989-2022 Toyota 90311A0027

Customer Questions & Expert Answers (47)
Toyota 90311-A0027 Rear Main Seal
Toyota 90311-A0027 Rear Main Seal
Toyota 90311-A0027 Rear Main Seal
  • Part Description
    Seal, Type T Oil; Engine Crankshaft Seal, Rear
  • Part Name Code
    11381A
  • Position
    Rear
  • Replaces
    90080-31053, 90311-92003, 90311-92010, 90311-92004, 90311-92006, 90311-92009
  • Manufacturer
    Toyota
Make sure this part fits
$43.98 MSRP: $61.21
You Save: $17.23 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 90311-A0027 Rear Main Seal is Ref No. 34 in the diagram below

    1996 Toyota Avalon Rear Main Seal Diagram for 90311-A0027
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 90311-A0027

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code11381A
    Manufacturer Part Number90311-A0027
    Part DescriptionSeal, Type T Oil; Engine Crankshaft Seal, Rear
    Other NamesOil Seal; Rear Seal; Front Seal; Seal, Engine Rear Oil; Engine Crankshaft Seal; Crankshaft Seal
    Item Dimensions5.1 x 5.2 x 0.4 inches
    Item Weight0.50 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces90080-31053, 90311-92003, 90311-92010, 90311-92004, 90311-92006, 90311-92009
    ManufacturerToyota
    SKU90311-A0027
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1989-2002 Toyota 4RunnerBase, DLX, Limited, SR56 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
    1995-2022 Toyota AvalonBase, Limited, Touring, TRD, XL, XLE, XLE Plus, XLE Premium, XLE Touring, XLE Touring SE, XLS, XSE, XSE Nightshade6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
    1994-2022 Toyota CamryCE, LE, SE, TRD, XLE, XSE6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2001-2022 Toyota HighlanderBase, Hybrid, Hybrid Limited, L, LE, LE Plus, Limited, Limited Platinum, Platinum, Plus, SE, Sport, XLE, XSE6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
    1989-1995 Toyota PickupBase, DLX, SR56 Cyl 3.0 L GAS
    2006-2012 Toyota RAV4Base, Limited, Sport6 Cyl 3.5 L GAS
    1998-2020 Toyota SiennaBase, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    2004-2008 Toyota SolaraSE, SE Sport, SLE, Sport6 Cyl 3.3 L GAS
    1993-1998 Toyota T100Base, DLX, DX, One-Ton, One-Ton DLX, SR56 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS
    2016-2022, 1995-2004 Toyota TacomaBase, DLX, Limited, Nightshade, Pre Runner, SR, SR5, S-Runner, Trail, TRD Off-Road, TRD Pro, TRD Sport6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Will 90311-A0027 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 90311-A0027 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you install a new oil seal for the 2007 Toyota Camry? Posted by Customer
    A:
    Apply MP grease to the lip of the new oil seal, ensuring it is free from foreign matter, and use the specified Special Service Tools and a hammer to tap the oil seal in until flush with the rear oil seal retainer edge, wiping off any excess grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the timing chain case oil seal for the 2008 Toyota Camry? Posted by Customer
    A:
    Cut off the oil seal lip with a knife and pry out the oil seal with a screwdriver that has a taped tip.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done after tightening the bolts for the 2004 Toyota Camry? Posted by Customer
    A:
    Ensure not to start the engine for at least an hour after installation, and then reinstall the automatic transaxle assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you secure and loosen the crankshaft pulley bolt if it is made in TMMK for the 2009 Toyota Camry? Posted by Customer
    A:
    Use Special Service Tool: 09960-10010 and 09962-01000 to secure the pulley and loosen the pulley bolt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the timing chain case oil seal be tapped for the 2009 Toyota Avalon? Posted by Customer
    A:
    Tap the timing chain case oil seal until its surface is flush with the timing chain cover edge, ensuring the tap-in depth is between 0 to 1.0 mm (0 to 0.0393 in.) while keeping the lip free of foreign matter and avoiding any angled tapping.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to replace the engine rear oil seal (2GR-FE) for the 2005 Toyota Avalon? Posted by Customer
    A:
    First, remove the automatic transaxle assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the procedure for TMC made engines for the 2009 Toyota Camry? Posted by Customer
    A:
    Align the pulley set key with the key groove, then use Special Service Tool: 09213-54015 and 91651-60855 to secure the pulley and tighten the bolt with Special Service Tool: 09330-00021 to the same torque specification.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to install the front crankshaft seal on the 2GR-FE engine for the 2008 Toyota Avalon? Posted by Customer
    A:
    Apply MP grease to the lip of a new oil seal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done to the crankshaft before installing the new oil seal for the 2003 Toyota Camry? Posted by Customer
    A:
    Check the crankshaft for damage and mend it with sandpaper (#400) if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the timing chain case oil seal for the 2010 Toyota Camry? Posted by Customer
    A:
    Cut off the oil seal lip with a knife and pry out the oil seal using a screwdriver with the tip taped.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the order of reinstallation after the oil seal is in place for the 2007 Toyota Avalon? Posted by Customer
    A:
    Reinstall the crankshaft pulley, the fan and generator V belt (installing the V-ribbed belt), the V-bank cover sub-assembly, and finally, the front wheel RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the next step after removing the engine cover sub-assembly No.1 for the 2006 Toyota Camry? Posted by Customer
    A:
    Remove the engine moving control rod with bracket by taking out the 3 bolts and the control rod.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the next step after installing the oil seal for the 2007 Toyota Avalon? Posted by Customer
    A:
    Reinstall the drive plate and ring gear or flywheel by holding the crankshaft with Special Service Tool: 09213-70011 (09213-70020).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to replace the engine rear oil seal with an automatic transaxle (A/T) for the 2005 Toyota Camry? Posted by Customer
    A:
    First, separate the A/T assembly after removing the engine assembly with the transaxle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the fan and generator V belt for the 2006 Toyota Avalon? Posted by Customer
    A:
    Use Special Service Tool: 09213-70011 (09213-70020), 09330-00021, 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021), and 09249-63010.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the drive plate and ring gear sub-assembly for the 2002 Toyota Highlander? Posted by Customer
    A:
    Fix the crankshaft with Special Service Tool: 09213-54015 (91651-60855), 09330-00021, and then remove the 8 bolts, rear spacer, drive plate, and front spacer.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the process for reinstalling the drive plate and ring gear sub-assembly for the 2005 Toyota Highlander? Posted by Customer
    A:
    Fix the crankshaft again with Special Service Tool: 09213-54015 (91651-60855), 09330-00021, clean the bolt and bolt hole, apply adhesive (Part No. 08833-00070, THREE BOND or equivalent) to 2 or 3 threads of the bolt end, and install the front spacer, drive plate, and rear spacer with the 8 bolts, uniformly tightening them in the specified sequence to a torque of 98 Nm (1,000 kgf-cm, 72 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the front drive plate spacer be installed for the 2009 Toyota Highlander? Posted by Customer
    A:
    Install the front drive plate spacer, aligning its pin with the crankshaft pin hole.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should you do after cutting off the oil seal lip for the 2003 Toyota Highlander? Posted by Customer
    A:
    Pry out the oil seal using a screwdriver with a taping tip, checking for crankshaft damage and mending it with sandpaper (# 400) if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should you check after removing the oil seal for the 2004 Toyota Highlander? Posted by Customer
    A:
    Check the crankshaft for damage and smooth any rough surfaces with 400-grit sandpaper if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the installation process for the new engine rear oil seal for the 2002 Toyota Camry? Posted by Customer
    A:
    Apply MP grease to the lip, ensure it is free of foreign materials, and use Special Service Tools and a hammer to tap it in until flush with the rear oil seal retainer edge, wiping off any excess grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you install the oil seal for the 2010 Toyota Camry? Posted by Customer
    A:
    Using Special Service Tool: 09223-15030 09950-70010 and a hammer, tap the oil seal in until its surface is flush with the rear oil seal retainer edge, then wipe off any excess grease from the crankshaft.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How is the crankshaft pulley secured during installation for the 2009 Toyota Highlander? Posted by Customer
    A:
    Use Special Service Tool: 09213-54015 91551-80650 to hold the crankshaft pulley while installing the pulley bolt with a torque of 260 Nm (2651 kgf-cm, 192 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you install the new oil seal for the 2001 Toyota Highlander? Posted by Customer
    A:
    Apply MP grease to the lip of the new oil seal, ensure it is free from foreign materials, and use Special Service Tool: 09223-15030, 09950-70010 and a hammer to tap in the oil seal until its surface is flush with the rear oil seal retainer edge, wiping off any excess grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done after removing the oil seal for the 2006 Toyota RAV4? Posted by Customer
    A:
    Position the oil seal retainer on wooden blocks and apply multi-purpose grease to the lip of a new oil seal, ensuring the lip remains free of foreign objects.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step in servicing and repairing the front crankshaft seal for the 2006 Toyota Highlander? Posted by Customer
    A:
    Begin by removing the front wheel RH, front fender splash shield front RH, front fender apron seal RH, engine cover sub-assembly No. 1, engine mounting stay No. 2 RH, engine moving control rod with bracket, and engine mounting bracket No. 2 RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be installed after the fender components for the 2008 Toyota Highlander? Posted by Customer
    A:
    The No. 1 engine under cover and the engine under cover assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you install a new oil seal for the 2007 Toyota Highlander? Posted by Customer
    A:
    Apply MP grease to the lip of the new oil seal, keeping it free from foreign matter, and use Special Service Tool: 09223-15030, 09950-70010 (09951-07100) and a hammer to tap in the oil seal until its surface is flush with the rear oil seal retainer edge, wiping off any excess grease from the crankshaft.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What checks should be performed after installation for the 2009 Toyota RAV4? Posted by Customer
    A:
    Check the engine oil level and inspect for any engine oil leaks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done after removing the old oil seal for the 2008 Toyota RAV4? Posted by Customer
    A:
    Place the oil seal retainer on wooden blocks and apply multi-purpose grease to the lip of a new oil seal, ensuring the lip remains free of foreign objects.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the final step after installation for the 2009 Toyota RAV4? Posted by Customer
    A:
    Connect the cable to the negative battery terminal and perform the Reset Memory procedure for U241E (2WD) or U140F (4WD) as necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the next step after installing the pulley bolt for the 2009 Toyota Sienna? Posted by Customer
    A:
    Install the V-ribbed belt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you install the flywheel sub-assembly for the 2008 Toyota Solara? Posted by Customer
    A:
    Fix the crankshaft with Special Service Tool: 09960-10010 09962-01000 09963-01000, clean the bolt and bolt hole, apply adhesive to 2 or 3 threads of the bolt end, and install the flywheel with 8 bolts, uniformly tightening them to a torque of 130 Nm (1,330 kgf-cm, 96 ft-lbf) in the specified sequence.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the engine rear oil seal for the 2008 Toyota Solara? Posted by Customer
    A:
    Cut through the oil seal lip with a knife and pry out the oil seal using a screwdriver with its tip taped.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the next step after installing the oil seal for the 2006 Toyota Sienna? Posted by Customer
    A:
    Reinstall the drive plate and ring gear sub-assembly by holding the crankshaft again with Special Service Tool: 09213-54015 (91651-60855), cleaning the bolts and bolt holes, applying adhesive (Part No. 08833-00070, THREE BOND 1324 or equivalent) to 2 or 3 threads of the bolts, and installing the front spacer, drive plate, and rear spacer on the crankshaft.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What torque should be applied to the pulley bolt for the 2008 Toyota Sienna? Posted by Customer
    A:
    Apply a torque of 250 Nm (2550 kgf-cm, 184 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What are the final steps after reinstalling the flywheel for the 2004 Toyota Solara? Posted by Customer
    A:
    Finally, reinstall the clutch disc assembly, clutch cover assembly, and the appropriate transaxle assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the engine rear oil seal for the 2005 Toyota Solara? Posted by Customer
    A:
    Cut through the oil seal lip with a knife and pry it out using a screwdriver with its tip taped.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the process for reinstalling the drive plate and ring gear sub-assembly for the 2005 Toyota Sienna? Posted by Customer
    A:
    Hold the crankshaft again with Special Service Tool: 09213-54015 (91651-60855), clean the bolts and bolt holes, apply adhesive (Part No. 08833-00070, THREE BOND 1324 or equivalent) to 2 or 3 threads of the bolts, and then install the front spacer, drive plate, and rear spacer on the crankshaft.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the next step for 2WD and AWD installations for the 2009 Toyota Venza? Posted by Customer
    A:
    For 2WD, install the automatic transaxle, and for AWD, follow the appropriate installation procedure.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you remove the timing chain case oil seal for the 2009 Toyota Sienna? Posted by Customer
    A:
    Pry it out with a screwdriver, ensuring to tape the screwdriver tip beforehand.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to service and repair the engine rear oil seal for the 2007 Toyota Solara? Posted by Customer
    A:
    First, separate the automatic transaxle assembly (A/T) or the manual transaxle assembly (M/T) after removing the engine assembly with the transaxle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How do you loosen the crankshaft pulley bolt for the 2007 Toyota Sienna? Posted by Customer
    A:
    Use Special Service Tool: 09213-70011 (09213-70020), 09330-00021 to loosen the crankshaft pulley bolt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What are the steps for servicing the M/T for the 2006 Toyota Solara? Posted by Customer
    A:
    For the M/T, remove the clutch cover assembly, clutch disc assembly, and flywheel sub-assembly, using the same Special Service Tool to fix the crankshaft before removing the 8 bolts, rear spacer, and flywheel.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the procedure for removing the oil seal for the 2004 Toyota Sienna? Posted by Customer
    A:
    Cut off the oil seal lip with a knife and pry out the oil seal using a screwdriver wrapped in tape, checking the crankshaft for damage afterward.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What tool is used to hold the crankshaft pulley while installing the pulley bolt for the 2009 Toyota Venza? Posted by Customer
    A:
    Special Service Tool: 09213-54015 91551-80650.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 90311-A0027, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 90311-A0027 Rear Main Seal. It is sometimes referred to as Toyota Crankshaft Seal. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 90311A0027 Rear Main Seal. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery