How to remove the front Sway Bar Kit on 2008 Toyota Corolla?

The initial step in front sway bar kit removal requires removing the front wheel first. Start by disconnecting the front sway bar link assembly on the left-hand side through removal of two nuts followed by its sway bar link; a hexagon wrench (6mm) should secure the stud when the ball joint turns with the nut. The same process should be applied to the right-hand side as well. You must disassemble Front Suspension Arm Sub-Assembly lower No. 1 on the left-hand side along with the right-hand side lower sub-assembly. The technician proceeds to separate the rack and pinion power steering gear assembly in the next step. Use correct suspension methods to hang the engine system according to automatic or manual transmission requirements. The second step calls for the separation of the front suspension crossmember sub-assembly. The sway bar kit front needs to be removed after you disconnect all 4 bolts and remove front sway bar bracket No. 1 LH and its corresponding left-hand side front sway bar bracket No. 1 RH along with 2 front sway bar bushes No. 1 from the front suspension crossmember sub-assembly.

OEM 2008 Toyota Corolla Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2008 Toyota Corolla Stabilizer Bar, Front
Part Number: 48811-AB011
$122.54 MSRP: $173.47
You Save: $50.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Suspension Stabilizer Bar Kit; Stabilizer Bar Kit; Sway Bar
- Position: Front
- Replaces: 48811-AB010
- Part Name Code: 48811
- Item Weight: 13.60 Pounds
- Item Dimensions: 6.4 x 11.1 x 41.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-AB011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- 50th Anniversary Special Edition, Base, CE, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Toyota Corolla Stabilizer Bar, Front
Part Number: 48811-12A60
$119.96 MSRP: $169.82
You Save: $49.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-12A00, 48811-12A70
- Part Name Code: 48811
- Item Weight: 5.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-12A60
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- Base, CE, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Toyota Corolla Stabilizer Bar, Rear
Part Number: 48812-AB011
$102.73 MSRP: $144.20
You Save: $41.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AB010
- Part Name Code: 48812
- Item Weight: 4.90 Pounds
- Item Dimensions: 42.8 x 9.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-AB011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS

2008 Toyota Corolla Sway Bar Kit

Looking for affordable OEM 2008 Toyota Corolla Sway Bar Kit? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Corolla Sway Bar Kit Parts Q&A

Q: How to remove the front Sway Bar Kit on 2008 Toyota Corolla?
A: The initial step in front sway bar kit removal requires removing the front wheel first. Start by disconnecting the front sway bar link assembly on the left-hand side through removal of two nuts followed by its sway bar link; a hexagon wrench (6mm) should secure the stud when the ball joint turns with the nut. The same process should be applied to the right-hand side as well. You must disassemble Front Suspension Arm Sub-Assembly lower No. 1 on the left-hand side along with the right-hand side lower sub-assembly. The technician proceeds to separate the rack and pinion power steering gear assembly in the next step. Use correct suspension methods to hang the engine system according to automatic or manual transmission requirements. The second step calls for the separation of the front suspension crossmember sub-assembly. The sway bar kit front needs to be removed after you disconnect all 4 bolts and remove front sway bar bracket No. 1 LH and its corresponding left-hand side front sway bar bracket No. 1 RH along with 2 front sway bar bushes No. 1 from the front suspension crossmember sub-assembly.