Other Name: Belt Assembly, Rear Seat I; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Position: Driver Side
Replaces: 73480-06061-B0, 73480-06060-B0
Part Name Code: 73480
Item Weight: 2.40 Pounds
Item Dimensions: 13.9 x 10.5 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73480-06062-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat I; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Manufacturer Note: GREGE,TRIM4#
Position: Driver Side
Replaces: 73480-06061-E0, 73480-06060-E0
Part Name Code: 73480
Item Weight: 2.40 Pounds
Item Dimensions: 13.8 x 10.6 x 5.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73480-06062-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat I; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
Manufacturer Note: BLACK,TRIM15
Position: Driver Side
Replaces: 73480-06061-C0, 73480-06060-C0
Part Name Code: 73480
Item Weight: 2.40 Pounds
Item Dimensions: 14.2 x 10.2 x 5.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 73480-06062-C0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
Base, CE, LE, SE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear; Belt Assembly, Rear Seat Inner W/Center, Passenger Side
Manufacturer Note: GREGE,TRIM4#
Position: Passenger Side
Part Name Code: 73470B
Item Weight: 1.80 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73470-33060-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 3 |Next >
1-20 of 45 Results
2008 Toyota Camry Seat Belt
Looking for affordable OEM 2008 Toyota Camry Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Camry Seat Belt Parts Q&A
Q: How to Properly Install a Seat Belt Assembly on 2008 Toyota Camry?
A: The installation of rear seat outer belt assemblies requires verification that ELR locking starts at 15 degrees and reaches 45 degrees where a gentle pull should be applied without retractor disassembly. Install the assembly through the seat belt positioning hole by engaging the claw and secure it with a bolt that requires 42 Nm (428 kgf-cm, 31 ft-lbf) torque. Start by installing the package tray trim assembly before adding the rear seat belt hole covers and their respective covers with four claws. The floor segment of the LH side rear seat outer belt assembly needs to be joined using a bolt with 42 Nm (428 kgf-cm, 31 ft-lbf) torque while verifying the ELR locking through swift belt pull. The procedure for RH connection must follow the same safety protocols as employed for the LH installation. After that, install the roof side inner garnish LH and RH followed by connecting the rear seat inner with center belt assembly for TMC as well as TMMK made vehicles then install the child restraint seat anchor bracket sub-assembly LH and both sides' reclining remote control lever sub-assemblies. First combine the rear door opening trim Weather Strip for both LH and RH sides before attaching rear door scuff plates to both sides. Installation of the center seat back assembly should be combined with separate type rear seat back assemblies for both LH and RH sides and the reclining seat type rear seat back cover. Both rear side seat back assemblies for fold-down seats and the rear seat back for the fixed seat type must be installed after the installation of center and rear seat headrest assemblies as well as rear seat cushion assembly.